KX500 rear brake conversion swingarm brackets

Joko
Profile picture for user Joko
Posts
1433
Joined
1/2/2011
Location
Cromwell, CT US
Fantasy
190th
Joko
Edited Date/Time 8/16/2022 8:54am
I made a few extra weld on brackets for converting the stock 89-02 KX500 swingarm to use late model KX250/450 rear brake caliper holder and caliper. Requires milling or grinding the old bracket off and welding the new on. You’ll also need to mill out the axle slots to 25mm to use the larger KX250/450 axle. But you can now use KX450 wheels instead of hard to find KX500 wheels. I can perform the machine work and and welding conversion if you need it.
Cost per bracket = $125, I have 8 to sell at this time. Thanks, Joe


3
|
Joko
Profile picture for user Joko
Posts
1433
Joined
1/2/2011
Location
Cromwell, CT US
Fantasy
190th
Joko 8/11/2021 11:02am
8/11/2021 11:02am
Joko wrote:
I made a few extra weld on brackets for converting the stock 89-02 KX500 swingarm to use late model KX250/450 rear brake caliper holder and caliper...
I made a few extra weld on brackets for converting the stock 89-02 KX500 swingarm to use late model KX250/450 rear brake caliper holder and caliper. Requires milling or grinding the old bracket off and welding the new on. You’ll also need to mill out the axle slots to 25mm to use the larger KX250/450 axle. But you can now use KX450 wheels instead of hard to find KX500 wheels. I can perform the machine work and and welding conversion if you need it.
Cost per bracket = $125, I have 8 to sell at this time. Thanks, Joe


I’m at 860-992-4377
nickg
Profile picture for user nickg
Posts
28
Joined
5/26/2021
Location
Spartanburg, SC US
nickg 8/11/2021 8:40pm
8/11/2021 8:40pm
i will call you in the morning
i want one
Joko
Profile picture for user Joko
Posts
1433
Joined
1/2/2011
Location
Cromwell, CT US
Fantasy
190th
Joko 11/7/2021 7:14pm
11/7/2021 7:14pm
I have several of these brackets left if anyone is interested

The Shop

See All »
Wycked31
Profile picture for user Wycked31
Posts
466
Joined
3/25/2014
Location
West Palm Beach, FL US
Wycked31 11/8/2021 5:32am
11/8/2021 5:32am
Joko wrote:
I made a few extra weld on brackets for converting the stock 89-02 KX500 swingarm to use late model KX250/450 rear brake caliper holder and caliper...
I made a few extra weld on brackets for converting the stock 89-02 KX500 swingarm to use late model KX250/450 rear brake caliper holder and caliper. Requires milling or grinding the old bracket off and welding the new on. You’ll also need to mill out the axle slots to 25mm to use the larger KX250/450 axle. But you can now use KX450 wheels instead of hard to find KX500 wheels. I can perform the machine work and and welding conversion if you need it.
Cost per bracket = $125, I have 8 to sell at this time. Thanks, Joe


Joko wrote:
I’m at 860-992-4377
What do you charge to do the mod?
kx500rider15
Profile picture for user kx500rider15
Posts
1
Joined
12/29/2021
Location
Beaverdale, PA US
kx500rider15 12/29/2021 5:39pm
12/29/2021 5:39pm
Joko wrote:
I made a few extra weld on brackets for converting the stock 89-02 KX500 swingarm to use late model KX250/450 rear brake caliper holder and caliper...
I made a few extra weld on brackets for converting the stock 89-02 KX500 swingarm to use late model KX250/450 rear brake caliper holder and caliper. Requires milling or grinding the old bracket off and welding the new on. You’ll also need to mill out the axle slots to 25mm to use the larger KX250/450 axle. But you can now use KX450 wheels instead of hard to find KX500 wheels. I can perform the machine work and and welding conversion if you need it.
Cost per bracket = $125, I have 8 to sell at this time. Thanks, Joe


Joko wrote:
I’m at 860-992-4377
Any still available
Joko
Profile picture for user Joko
Posts
1433
Joined
1/2/2011
Location
Cromwell, CT US
Fantasy
190th
Joko 12/29/2021 7:44pm
12/29/2021 7:44pm
Joko wrote:
I made a few extra weld on brackets for converting the stock 89-02 KX500 swingarm to use late model KX250/450 rear brake caliper holder and caliper...
I made a few extra weld on brackets for converting the stock 89-02 KX500 swingarm to use late model KX250/450 rear brake caliper holder and caliper. Requires milling or grinding the old bracket off and welding the new on. You’ll also need to mill out the axle slots to 25mm to use the larger KX250/450 axle. But you can now use KX450 wheels instead of hard to find KX500 wheels. I can perform the machine work and and welding conversion if you need it.
Cost per bracket = $125, I have 8 to sell at this time. Thanks, Joe


Joko wrote:
I’m at 860-992-4377
kx500rider15 wrote:
Any still available
Yes, I have a few left

Post a reply to: KX500 rear brake conversion swingarm brackets