Recent Activity
All
xrta-stark Added a reply to cr125 with one-off parts
5/3/2023 4:17pm I could probably make one. my motor isn't a stroker. The longer rod + the spacer i made affects the port timing and piston speed, rod angle and crankcase volume.
More »
xrta-stark Added a reply to cr125 with one-off parts
5/1/2023 5:28pm
xrta-stark Added a reply to cr125 with one-off parts
5/1/2023 5:25pm what's this 👀
xrta-stark Added a reply to cr125 with one-off parts
4/29/2023 2:38am finally got the bottom end back together. what do you guys think about the clutch cover
xrta-stark Added a reply to cr125 with one-off parts
4/27/2023 12:43pm mitä luulet?
xrta-stark Added a reply to cr125 with one-off parts
4/24/2023 5:08am 22
xrta-stark Added a reply to cr125 with one-off parts
4/24/2023 3:35am yes it's a ktm rod.
xrta-stark Started a new thread cr125 with one-off parts
4/22/2023 3:49am So I picked up this cr125 and decided to make the bike fresh for next riding season. I'm going for a full rebuild: + I'm going to machine some one off parts like triple clamps, linkage, cylinder head etc. Im especially sharing some pics of these cnc parts. Also swapping a '99 cylinder and doing a long rod conversion...
This forum thread has 34 replies.
xrta-stark Added a reply to cr125 with one-off parts
4/19/2023 1:12pm hpp cylinder with spacer plate. The conrod is 6mm longer.
xrta-stark Added a reply to cr125 with one-off parts
4/19/2023 10:15am Had to machine the crank so I can put balance inserts. It's was put together with longer rod so I had to calculate how much to remove weight. air forks
xrta-stark Added a reply to cr125 with one-off parts
4/19/2023 10:06am cases cerakoted
xrta-stark Added a reply to cr125 with one-off parts
4/19/2023 1:26am new wheels
xrta-stark Added a reply to cr125 with one-off parts
4/19/2023 1:22am parts came back from anodizing
xrta-stark Added a reply to cr125 with one-off parts
3/25/2023 1:06pm Your clamps dont fit my bike so I had to make my own haha. I got some inspiration from your clamps but dont worry I only made one pair 
here is the linkage
here is the linkage
Glen Liked a reply to forum topic cr125 with one-off parts
3/25/2023 12:51pm
beautiful work!
This forum topic has 34 replies.
xrta-stark Added a reply to cr125 with one-off parts
3/23/2023 5:33pm 7075 linkage arm with adjustable lenght. Similar to Luxon mx design.
xrta-stark Added a reply to cr125 with one-off parts
3/23/2023 5:12pm Done. I'm also sending these clamps to anodizing
xrta-stark Added a reply to cr125 with one-off parts
3/23/2023 5:05pm Lower and upper first op.
xrta-stark Added a reply to cr125 with one-off parts
3/23/2023 5:00pm I already started tearing it down a few weeks ago. Glad there were no suprises. The first fun little project was to design and machine new triple clamps. I dont like the cast aluminum clamps so I spent few nights drawing a new 3d cad model. These clamps are stronger in critical spots, but also a few grams lighter than...