Recent Activity
All
GuyWithABike Liked a reply to forum topic 21 ktm 350 xcf stiff clutch pull
6/4/2025 1:52pm
I don’t think the slave cylinder change is going to help much. Ktm uses a concave/convex disk (DDS) in lieu of springs to apply pressure to the clutch discs. I would start by adjusting the ring that sits on the disk. There are holes where the bolts go through numbered 1,2,and 3 that hold different amounts of pressure to the disk. Look up that adjustment on you tube. Looks like below.
This forum topic has 4 replies.
treylies Started a new thread 21 ktm 350 xcf stiff clutch pull
6/3/2025 5:55pm Just picked up a 2021 ktm 350 xcf and one of the first things I noticed was the hard pull on the clutch lever. I was wondered what I can do to get a lighter pull, my brother has a 21 250 xcf with a auto rekluse. The pull on his clutch is perfect. Could I just get the rekluse...
This forum thread has 4 replies.
joelsmith Liked a reply to forum topic 2017 kx250f front breaks locked up
7/2/2024 2:17pm
Same thing happened to me years ago. The caliper seals were frayed and not allowing the pistons to retract. Grabbed the brake at the end of a 4th gear straight and became a lawn dart. Once I got home from the ER it had some drag but rolled. Rebuilding the caliper did it. Cheap and easy
This forum topic has 11 replies.
treylies Added a reply to 2017 kx250f front breaks locked up
7/2/2024 1:27pm Remove some from the line or the reservoir?
treylies Added a reply to 2017 kx250f front breaks locked up
7/2/2024 12:27pm So flush the fluid or what should I do?
treylies Added a reply to 2017 kx250f front breaks locked up
7/2/2024 12:26pm Haven’t messed with the lever but I just put new pads in
gscx Liked a reply to forum topic 2017 kx250f front breaks locked up
7/2/2024 12:25pm
Did you just put on a new front brake lever? I have had one where it engaged the piston too much and when it heated up it would drag and lock up.
This forum topic has 11 replies.
motomind00132 Liked a reply to forum topic 2017 kx250f front breaks locked up
7/2/2024 12:25pm
Still have to much fluid in there. Your brake rotor spining in between the pads still creata heat and causes the fluid to expand and locks your front brake up. Then as it cools the fluid contracts and frees the disk. Either that or your caliper is sticking. Moneys on the fluid. Seen many people do this over the years.
This forum topic has 11 replies.
treylies Added a reply to 2017 kx250f front breaks locked up
7/2/2024 11:56am Lever is good and I flushed the fluid
treylies Started a new thread 2017 kx250f front breaks locked up
7/2/2024 11:27am I have a 2017 kx250f with front break locking issues. I got to where I was planning on riding, I take the bike out and the front brakes slowly locked. Then sat on the side of the road for a little bit, they unlocked then started to ride back to the truck. They locked up again without touching the break...
This forum thread has 11 replies.
treylies Added a new video 2003 rm125 bogging
6/18/2024 9:39am
Bike bogs after hitting the throttle as seen in video. Do I need to redo the jetting or can I get away with tuning the carb