Recent Activity
All
sutton33us Added a reply to Ct racing c310 cylinder on CR250
10/30/2026 12:20am I have a DPR pipe and FMF powercore2 silencer on it,a pwk 38 airstriker carb,boyesen reeds,10mm spacer on the powervalve and 10oz flywheel weight. The only thing i could do more is porting and high compression head. I want to keep the cylinder original,so thats why i want to try that big bore kit. My previous bike (30 years ago)...
More »
sutton33us Added a reply to Ct racing c310 cylinder on CR250
10/29/2026 10:21am Mx track only,vet class
sutton33us Added a reply to Ct racing c310 cylinder on CR250
10/29/2026 7:32am ESR went out off business,i contacted CT racing and they said they have a cylinder that fits,without powervalve so i was wondering if anyone had experience with them.
sutton33us Started a new thread Ct racing c310 cylinder on CR250
10/28/2026 12:50pm Does anyone have experiance with a ct racing 310cc cylinder on a 2001 Honda CR250? I am looking for more low end power and do not want to bore out my original cylinder. But before i spend a couple thousend i want to make sure it is worth it.
This forum thread has 7 replies.
sutton33us Added a reply to 2025 ktm xact aer forks
4/19/2026 2:16am Does your setup soak up the small stuff like breaking bumps? Thats where my forks feel very harsh. What is your skill level?
sutton33us Added a reply to 2025 ktm xact aer forks
4/14/2026 10:58pm Thanks for your reply. I have gone through all the basic steps again It is my sons bike by the way,a 2025 ktm sx 250,he weighs about 83kg with full gear I opened the bleeder screws again and a lot of air escaped,so that will help. But i found out he had a collision with another rider on the side...
sutton33us Started a new thread 2025 ktm xact aer forks
4/12/2026 1:42pm My 2025 xact aer forks feel very stiff,i set the air pressure as low as 130 psi and made sure the forks are lined up correctly but that didn't help I want to open them up to see if the first owner maybe put too much oil in it or wrong seals The left forkcap looks like this,i don't see...
This forum thread has 8 replies.
sutton33us Started a new thread Cr 250 big bore?
4/6/2026 7:20am Is there any company that sells a complete big bore kit for a 2001 Honda cr250? I wanted to go for the Eddie Sanders 325 but i heard he went out off business,although his website is still up.
This forum thread has 1 reply.
sutton33us Started a new thread Honda cr 250 in Husqvarna chassis?
1/23/2026 5:39am Does anyone know if there has been a Husqvarna / Honda cr 250 conversion build? Husqvarna has the steel chassis and is a lower chassis then most four strokes at the moment. It might suit me better because i am not that tall
This forum thread has 0 replies.
sutton33us Added a reply to Honda CR250 2001/2021 plastics retrofit
1/20/2026 1:37pm Any update on this would be great!
sutton33us Added a reply to CRF 250 or 450 chassis for cr 250 conversion
1/19/2026 9:34am Thanks for your suggestion but i would like to avoid any welding. That bike does look fantastic by the way
sutton33us Started a new thread CRF 250 or 450 chassis for cr 250 conversion
1/18/2026 7:30am I am currently riding a 2001 CR 250 and the chassis is beginning to show its age. I had a small crack under the seat and all the welds on the side of the frame are wearing thin. Also the forks and shock are beginning to wear thru the chrome so that wil have to be replated. With all those...
This forum thread has 5 replies.
sutton33us Added a reply to 2021 cr 250 two stroke conversion
1/18/2026 7:04am so there was no welding required at all?