Recent Activity

All

TheWeapon Liked a reply to forum topic Bench Racing | St. Louis Supercross Timed Qualifying

4/4/2026 12:52pm
There was a time when we all used to run them on the outside…
This forum topic has 94 replies.

CPR Liked a reply to forum topic Bench Racing | Detroit Supercross Night Show

3/29/2026 12:20am
Big difference, one took out a Redbull rider, the other was Monster.
This forum topic has 384 replies.

ola Added a reply to 1995 ex factory team husaberg fc 580

3/24/2026 1:50pm
Could be, I haven’t seen your type before. Folan made designs and parts with and for Husaberg for many years. The only two piece clutchcover I’ve seen is this, and it is Italian although not Vertemati.

caviar&cigarettes338 Liked a reply to forum topic 1995 ex factory team husaberg fc 580

3/18/2026 10:09am
I found out more information on engine today well 2 piece clutch covers was told by old school guy that it was made by Folan and not the Italians and the tank was made by Rodger Heap in the 90s a uk hop up husaberg guy . Soon as I crack the engine open I’ll let you know I really appreciate your help
This forum topic has 52 replies.

caviar&cigarettes338 Liked a reply to forum topic 1995 ex factory team husaberg fc 580

3/6/2026 10:56pm
Got the bike all back together from it being torn apart from shipping . Going collect parts for it then tear it down and restore it once I find everything which I know will take long time
This forum topic has 52 replies.

DonM Liked a reply to forum topic Did They Really Not Know?

3/1/2026 2:03pm
It’s not Chase or Jorge it’s 100% on the upper management of that team. For years they thought that they were smarter than everyone else and won some championships on an older proven model, they have brought that same mentality to the new chassis and they have yet to figure it out…this is no different that what happened to Yam with Keith McCarty when the technology passed them by they were left clueless on motor development and set up…all you have to do is listen to the interviews that Lewis did recently and realize that they are complete corporate mouthpieces...
This forum topic has 38 replies.

ola Added a reply to 1995 ex factory team husaberg fc 580

3/1/2026 1:42pm
No worries 👍🏻 The crosstube on the swing is original. Maybe you can measure the stroke from the sparkplug hole? Then the bore could be calculated. 585 is only 10cc less than stock 600, so it must be a different bore/stroke configuration for it to be any reason. By the drainplug at the side of your right enginecase you have...

caviar&cigarettes338 Liked a reply to forum topic 1995 ex factory team husaberg fc 580

3/1/2026 1:26pm
I tried to look around more for more cast marks only different mark I found was a yellow paint mark on the trans ? Don’t know if that be fim inspection marks like the red paint mark on cylinder . And sorry wasn’t trying come off rude
This forum topic has 52 replies.

ola Added a reply to 1995 ex factory team husaberg fc 580

3/1/2026 12:28am
Nice 👍🏻 Off course you should listen to a factory mechanic over me, no problem, enjoy the bike. I would be very interested in knowing the bore/stroke of the 580 or 585 as your cylinder says. I have never seen one. Please let me know if you open the motor. 530 (pre 93 501 crankshaft with milled down 600 cylinder)...

ola Added a reply to 1995 ex factory team husaberg fc 580

2/28/2026 2:04pm
I’m not here to talk down your bike. I just wanted you to know. Glenn wrenched for Smets 1997-99, those years the bike had the motor with oilpump. Yours is 1996 or older, and without oilpump. Different motor. The pictures you are putting up is the 1997 bike. The two piece special clutchcover is very cool, but I think you’ll...

ola Added a reply to 1995 ex factory team husaberg fc 580

2/6/2026 12:35pm
Hi If someone sold you this as a ex Smets factory bike I’m sorry to say I think you have been scammed. I can’t see one single factory part from the 1995 bike on it. Let alone any factory part from any other year. The clutchcover could perhaps be from the Vertemati years, but in that case doesn’t fit the...