Recent Activity
All
BoxcarWilly Liked a forum topic Moto Van Necessities?
6/4/2026 6:21pm
I’m sure this has been brought up before, but I’ve finally bought a cargo van for camping/hauling bikes. Just curious as I’m about to build it out if anyone has any tips or recommendations for anything “must have” or maybe something helpful you just might not think of. I have a dedicated toolbox, some shelving/counter space, a hand pump washer if the bikes get crazy dirty, etc.
This forum topic has 42 replies.
MotoSag Added a reply to anyone else feel like all knee braces suck?
5/31/2026 2:32am This is what I meant with newer braces that I hate. You don't only squeeze into the bike with your knees but you also hold on from forward acceleration. The forward acceleration makes them roll as the bike pulls your leg forward. The older braces I had wrapped around enough so they don't roll off the squeeze point.
More »
MotoSag Started a new thread anyone else feel like all knee braces suck?
5/30/2026 12:39am I use to use evs RS7 knee braces and they use to wrap around my knee to the point where the hinge was behind my knee hinge point . This would help when I squeeze the bike my knee seats into the brace and doesn't push out the brace. All the new braces I've tried have their squeezing pads/hinges exactly...
This forum thread has 12 replies.
MotoSag Started a new thread YZ125 2025 FMF pipe same part number but different pipe?
5/22/2026 5:37pm Hi All Im looking for a FMF fatty for 2025 yz125. No website in australia shows stock for 2025 but i can find stock for 2022. When i look on the FMF website the part number for the 2022 and the 2025 is the same? Are they really the same or is the spec different? both come up with Factory...
This forum thread has 1 reply.
MotoSag Added a reply to what makes a 2 stroke sound good and crispy?
4/9/2026 5:48am I already burnt the pipe out and repacked the silencer. I think the packing may be too much, I basically took a sheet and rolled it up around the perforated tube inside the silencer then forced it in the aluminium body. It is a shorty. I rate loosely torn stuffed packing would sound better.
MotoSag Added a reply to what makes a 2 stroke sound good and crispy?
4/8/2026 6:04am What would you consider a properly packed silencer?
MotoSag Added a reply to CMT composites does not respond?
4/7/2026 7:07pm Update.....Still no reply 😂
MotoSag Started a new thread what makes a 2 stroke sound good and crispy?
4/7/2026 7:03pm Alot of 2 strokes I've had have never quite stayed crisp. Particularly the sound the motor makes. From brand new the bike sounds sweet. All you hear is the 2 stroke pop of the thin walled pipe and well packed silencer. Almost no motor crank or bearing noise. After the bike is clapped and rebuilt I've never been able to...
This forum thread has 11 replies.
MotoSag Added a reply to Why do some people say racetech goldvalves are a step back from new KYB stuff?
1/23/2026 4:21pm The stock forks are just harsh on chop. As soon as the front wheel smacks the ground it hurts my hands. I want the initial hit to be soft then ramp up damping to hard. Not even sure if that possible. I don't mind my fork bottoming out every now and then it's quite a nice feeling having that knock...
MotoSag Started a new thread Why do some people say racetech goldvalves are a step back from new KYB stuff?
1/23/2026 4:49am Is the new KYB stuff really that good that the racetech goldvalves would be a step in the wrong direction? I have a yz450f 2023 model and changed the leaf spring midvalve to the older style spring by installing krooztune midvalves. As for shimming ive kept it close to stock but it feels horrid. Not knowing what I'm doing I...
This forum thread has 12 replies.
MotoSag Added a reply to KYB SSS over the years
12/13/2025 2:02am Sweet thanks for the info ill try this for sure.
MotoSag Added a reply to KYB SSS over the years
12/12/2025 7:06pm Can you convert the newer 25mm leaf spring back to float style?
MotoSag Added a reply to KYB SSS over the years
12/12/2025 6:49pm Oh wait so are you saying the 2023 yz450f does not use the float style midvalve anymore?
MotoSag Started a new thread KYB SSS over the years
12/7/2025 2:32pm Ive ridden a few different bikes over the years: 2009 CRF450r - suspension was clapped because the fork cartridge seals were custom machined from a BMG seal jet machine and were too tight but i had no reference, i was too poor for mx bikes at this point in time. 2014 CRF450r - These were air forks, they felt much...
This forum thread has 6 replies.
MotoSag Started a new thread How do the fast guys stand and accelerate?
11/2/2025 5:20am There is an uphill hardpack straight at my local track and it's so choppy I can't sit because too much shock get transfered into my back. The only way I can accelerate is to standup but I find when I standup I hang on my arms so much it instantly gives me armpump. If I stand my elbows kinda tuck...
This forum thread has 24 replies.
MotoSag Added a reply to CMT composites does not respond?
10/31/2025 1:06pm Thanks I've contacted one of the retailers. Hopefully they respond. What are your guys opinions on carbon tanks? I see alot of GP bikes run them. Wasn't sure about ama and the rules but alot of googling tells me they are not as durable as plastic and it may be a safety hazard? To me the tank is pretty well...
MotoSag Started a new thread CMT composites does not respond?
10/31/2025 4:37am Has anyone here had any luck getting in contact with CMT composites? I've messaged them on 3 different occasions on their customer portal and no one ever responds. I tried to get hold of them on Instagram and it just routes you to their website customer form. I am trying to find out if they do a tank for a...
This forum thread has 26 replies.