Recent Activity
All
Mike_Sabol_314 Started a new thread Gravity Fed Simpson Pressure Washer
7/3/2021 9:55pm Has any one tried to gravity feed this pressure washer? I’m not sure if it will work. It’s a Simpson H326 MS60773 2800 PSI 2.3 GPM Gas Pressure Washer with a Honda motor. The book says minimum 20 psi input water pressure and if you do the math you only get 16-17 psi with a tank in the back of...
This forum thread has 26 replies.
Mike_Sabol_314 Added a reply to Gravity Fed Simpson Pressure Washer
4/17/2020 10:39am The only issue is if you look at the manual of the pressure washer there may be a minimum required input pressure. I'm not sure if this is true for all pressure washers, but for the one this thread was started for stated a minimum 20 psi input. Although, someone commented it worked just fine with gravity feed out of...
More »
Mike_Sabol_314 Added a reply to Showa TAC SKF glide kit
4/25/2017 1:07pm Yeah the stiction is horrible on mine. I just run low psi in the outer and it helps the sticking in the initial stroke for now. Ill probably go with the glide kit. I was just looking for a cheaper alternative (60 bucks vs 165). It looks like JBI installs it free with a valve job, or ill just look...
Mike_Sabol_314 Added a reply to Showa TAC SKF glide kit
4/25/2017 10:34am Bruce, My 2016 KX450F is one year old and has 20 hrs on it. Would you suggest getting the Lainer piston to help with the stiction problem or go with the glide kit? Also, is there a link to a video on how to do the piston? Or do you have a step by step you can share and the...