Recent Activity
All
J72 Added a reply to Yamaha YZ250F YZ450F - KTM Brembo brake adapter/hanger
12/13/2025 1:59am In the mean time i bought a 320mm sxf carrier from Ali and with a little machining it worked 😃. I had to relocated and tapped 3 holes and machined off exess material.
More »
J72 Added a reply to Yamaha YZ250F YZ450F - KTM Brembo brake adapter/hanger
12/12/2025 2:54am Hello, I have a 2007 YZ250 that I want to fit a brembo caliper on. Can someone tell me the difference between 2007 & 2008 brake carrier adapters. I assume the bolt distance is different. I have 270mm rotor. Is a bolt on brake carrier adapter for brembo available for 2007 YZ250 ? Thanks, Jurgen Belgium
Luxon MX Liked a reply to forum topic WP AER48 - KYB by Technical Touch Belgium photos
4/1/2020 12:05pm
WP lower tubes are a touch stiffer than KYB and have tighter tolerances. See here for some info: https://luxonmx.com/blog-luxon-fork-tube-stiffness-flex.html
This forum topic has 63 replies.
J72 Added a reply to WP AER48 - KYB by Technical Touch Belgium photos
4/1/2020 12:04pm Hey Luxon, Nice study! The difference in flex however is for us mortals probably not noticable. Reed however pushes the limit. GreetsJ72
J72 Added a reply to WP AER48 - KYB by Technical Touch Belgium photos
4/1/2020 6:30am Chad switched to wp to get more support form husqvarna factory.
J72 Added a reply to WP AER48 - KYB by Technical Touch Belgium photos
4/1/2020 6:29am Hey, i don 't understand what you mean with wo tubes, but i think you mean wp tubes. It is pure a cost factor. Reusing existing tubes is cheaper and no downside. Greets J72
J72 Added a reply to WP AER48 - KYB by Technical Touch Belgium photos
3/31/2020 11:56am I would greatly recommend the settings of motocross action chad reed replica with springs for your weight. Greets J72
J72 Added a reply to WP AER48 - KYB by Technical Touch Belgium photos
3/31/2020 11:53am Hey, Same here, I am going to buy sxf450 and already planning kyb conversion. For translation you can always use deepl translator. I will also have the lower tubes dlc coated. TT does not do that . Greets J72
J72 Added a reply to WP AER48 - KYB by Technical Touch Belgium photos
3/24/2020 2:14pm @ Diego, Hier de link naar de bewuste chad reed replica door mxa. Greetshttps://motocrossactionmag.com/we-build-an-exact-chad-reed-replica-2018-husqvarna-fc450/
J72 Added a reply to WP AER48 - KYB by Technical Touch Belgium photos
3/24/2020 2:08pm Diego, Opgelet : het gaat hier over de chad reed replica gemaakt door mxa magazine. Niet de setting van reed zelf. Zou een soepele vering zijn volgens hen. Zie link. Bedankt https://www.google.be/amp/s/motocrossactionmag.com/amp/fork-works-kyb-factory-kit-spring-forks-for-ktm-husqvarna/
J72 Added a reply to WP AER48 - KYB by Technical Touch Belgium photos
3/24/2020 1:44pm Dag Diego, Hebben jullie ook de settings van de chad reed replica van mxa. Kan deze dan in de cartridge conversion kit gezet worden ? Zijn er ook nog andere opties beschikbaar zoals wp std buitenpoten coaten, binnenpoten coaten? Greets