All

Not sure if this is a stupid question or not but I’ve got a ktm sxf 250 2011 with a full pro circuit exhaust system. The silencer has a hole in it due to an off. I’m just wondering if any other brand of exhaust silencer will fit the pro circuit front pipe? Thanks in advance.

Hi, been out riding at the weekend and didn’t notice until I got home and put new tyres on that the swing arm is not central with the rear fender/sub frame. It is catching the exhaust even with spacers on. And is catching the underneath right side of the rear fender when nearly bottoming out. I’ve attached photos. What do...

Hey, does anyone know if I can buy the part in the picture or know of any breakers who may be able to help. I can buy the rod and this part as a whole but don't want to have to fit the new rod. The part in the picture, the thread has gone on the top that screws onto...

I have a sxf 250 2011 iv been have problems with it bogging and cutting out. Iv swapped a tank from a friend and it runs fine. Iv since changed the fuel filters and still having the same problem so it has to be the fuel pump itself. Can anyone recommend an aftermarket pump, as to replace new there around...

I have a ktm 250 sxf 2011 efi. I was out last weekend on the bike and did one 20 min session. I went out to do another session 20 mins later and on lap in the bike started bogging and then cut out. It started again but bogged and cut. I walked it off track and let it cool...

Anyone know if this 2015 holeshot device/ rear linkage will fit my 2011 sxf 250?? Thanks!!

I'm currently running 13-50 on my ktm250f and its maxing out on certain tracks would dropping to a 48 make a big difference??

Thinking of jumping from a 250f to 450f I'm around 220lbs 6'3 and feel I'm killing the 250 with my weight. Not ridden a 450 before what should I expect besides the obvious weight and power and should I do the swap?? Thanks