Recent Activity
All
cjp13021 Started a new thread 2019 cobra fwe 50 pulling my hair out
8/19/2024 2:33pm So I changed top end o rings piston and piston rings and head gasket, squish was good at 55. Few races later he had other issues with a broken reedsso Brand new reeds and reeds cages cleaned carb new throttle cable new cfd slipper rebuild kit set at 80 foot pounds, brand new clutch shoes. Rode nice after that he...
This forum thread has 2 replies.
WestoftheElwha Liked a reply to forum topic 2019 cobra fwe cfd help
8/6/2024 9:53am
Get a buddy to help you back it up and do it that way. Make sure you have good wrenches and sockets so you don't round it off. Also we never could get ours to make torque in either direction, only in the direction it spins when being used. So don't worry about the either direction part in the manual. One thing we ran into years ago was the cfd would adjust to torque but only hold it for one moto. That means you have hairline cracks in your cfd hubs. (Those little metal disk pieces that sandwich the cfd...
This forum topic has 3 replies.
cjp13021 Added a reply to 2019 cobra fwe cfd help
8/6/2024 9:53am I got a rebuild kit coming the nut is as tight as it can be even with the impact so it’s got to be worn down in there. I got it to loosen and bust free and tried retightening but no luck. How far away from the basket should the clutch shoes be?
cjp13021 Started a new thread 2019 cobra fwe cfd help
8/5/2024 9:59pm Trying to adjust the slip on 2019 cobra fwe 50 cc, it’s way too low at about 55. When I put the gear stop in and try to turn the nut, the nut and the bolt both spin. The gear itself doesn’t move but the nut and bolt both spin so I can’t adjust it. I can put the sprocket...
This forum thread has 3 replies.