Recent Activity
All
Borz#36 Added a reply to The Best, Worst Honda CR125 build, 1998 edition
9/21/2020 10:51am Hi kdiringer! I want to ask you if it’s enought to change only the wheel bearings to fit the newer crf wheels. Or the newer wheels are wider?🤔
More »
Borz#36 Added a reply to The Best, Worst Honda CR125 build, 1998 edition
4/24/2020 5:25am Do you think i can fit this type in? I’l have to cut the subframe and also modify the airbox, but i don’t know what to do...
Borz#36 Added a reply to The Best, Worst Honda CR125 build, 1998 edition
4/24/2020 3:24am Hi kdiringer. I am also rebuilding a 98 cr125 and i want to buy a 2010 crf ohlins shock for it. Let me ask you some question: Why you did not fit a crf shock in the bike? Can you make some pictures of the weldings and adjustments on the subframe? Thank you.
Borz#36 Added a new Blog Post Swingarm swap from crf to cr and cr to crf
5/28/2018 4:29pm Hi everyone i have a 1998 cr 125 and i want to swap a swingarm with linkage,brake and tires from a 2013 crf 450R (and vice-versa) with little modification to the crf swingarm and cr linkage i can do...
Borz#36 Started a new thread PLEASE HELP crf 450r no spark
2/12/2018 4:10pm Hi i had a bad crash last year with my bike and after the crash the bike wont start...there is no spark at the coil,the injector wont pulverise but the fuel pump works i mesure the 2 ckp sensor and the resistance is 240.8ohm and the alternator does give 12V because i tried it with a 12V light bulb and...
This forum thread has 33 replies.
Borz#36 Added a reply to PLEASE HELP crf 450r no spark
2/12/2018 4:10pm Still no spark the rectifier,condenser,coil are good...could it be the fuel pump?
Borz#36 Added a reply to PLEASE HELP crf 450r no spark
12/16/2017 4:23pm ?
Borz#36 Added a reply to PLEASE HELP crf 450r no spark
12/16/2017 3:07pm Well i ordered a stator and put it in...the bike still doesn’t have spark and won’t pulverize the injector...cold it be the rectifier or condenser?
Borz#36 Added a reply to PLEASE HELP crf 450r no spark
11/8/2017 8:44am ?
Borz#36 Added a reply to PLEASE HELP crf 450r no spark
11/5/2017 2:12am Can somebody explain with the diagram with the wire betwen a cable and the ground? I don't understand why if there is continuity is a problem and if not that also is a problem ...
Borz#36 Added a reply to PLEASE HELP crf 450r no spark
11/5/2017 2:06am Where i should plug the screwdriver? In the back of the connector?
Borz#36 Added a reply to PLEASE HELP crf 450r no spark
10/31/2017 3:31pm I tried this method probably 10 times but still no spark and no injector pulverisation
Borz#36 Added a reply to PLEASE HELP crf 450r no spark
10/30/2017 9:53pm No...the handlebar was compleately destroyed and also the cluch brake stop button but i changed them
Borz#36 Added a reply to PLEASE HELP crf 450r no spark
10/29/2017 2:44pmBorz#36 Added a reply to PLEASE HELP crf 450r no spark
10/29/2017 2:44pm Well i ordered a used ECU from a working bike and i still have no spark i checked again the wire harness and o think that i have a short to the ground or i don't know because the service book says if it's continuity between a wire and the ground i should have short in that wire...and if i...
Borz#36 Added a reply to PLEASE HELP crf 450r no spark
9/4/2017 8:41am Yes and they create
Borz#36 Added a reply to PLEASE HELP crf 450r no spark
9/3/2017 11:13pm I cleand the connectors and i mesure for continuity every single wire
Borz#36 Added a reply to PLEASE HELP crf 450r no spark
9/2/2017 1:58pm Well i tried it with the kill switch unpluged... and i mesure the switch again...nothing...there is no spark and i search for the tip over sensor and the crf does not have one...i am thinking that the stator or the ECU is bad but 80%is that the ECU because i heard about the CKP sensor that it should be 240ohm...
Borz#36 Added a reply to PLEASE HELP crf 450r no spark
9/1/2017 2:16am But the switch is brand new
Borz#36 Added a reply to PLEASE HELP crf 450r no spark
9/1/2017 2:16am I search on line and i did not find a tip over sensor for my bike...i think that the ecu is the problem