All

Owned a pool for many years, i bet you cloudy water is because you have not shocked it high enough to kill all the living organisms. I use to spend a boat load of money at the pool store take water to them they test it and sell me a bunch of chemicals.Now i have a salt water generator -...

That looks about right mine was off by 1.4mm on the left side- not much but just enough to put the bolt hole off if you do not modify the stop arm pin hole. Glad to see the right side works my pins was off by 1,2mm on the right side but dont see a reason they would not work...

CarlinoJoeVideo- start with the left side of the bike that is where i run into the problem. I never tried the right side but from my measurement they were off a little also- this is for the (1st batch of arms i think) as far as grinding talk to Jbone Motosport (great guy and recommend his work to any KTM...

I received a set of the power valve arms but could not get them installed. The arm pin was in the wrong spot, if you look at the above pics look at the pin placement on the black arm and the gold arm (gold pin is closer to the rectangle cut out). The left arm has a arm stop that...