Recent Activity
All
TeamGreen Liked a reply to forum topic Definitive GASGAS-KTM parts differences thread
12/13/2020 5:10am
TC/Curve Switch set ($150) Top Triple that allows for Rubber Mounted bar clamps ($150-200 when you shop wisely and that's IF ya really need it). THAT IS ALL THAT YOU REALLY NEED..."if" ya really need it. But, I could be wrong...and I am wrong sometimes. Case in point: in a recent duscussion about "the next Rockstar/Red Bull Edition" I was a year "behind". I actually thought we were talking about the bikes I've seen in testing recently. Guess what? We -weren't-...which is funny as hell and makes it very clear: I was wrong. So, there's always that! 
This forum topic has 54 replies.
addimatty Added a reply to Riding with torn rotator cuff...???
12/11/2020 3:25am And also - try to get off some inflamation if You have any - your GP should help with the prescription etc. I made a mistake after first complete dislocation as I did not move the arm enough and I had some rough time with rehab. Try to do some limited mobility exercises to the shoulder, make the shoulder muscles...
addimatty Added a reply to Riding with torn rotator cuff...???
12/11/2020 3:23am Hi! I had problems with the shoulder for past few years. So I tore off so called "front lip" (english is not my native tongue) and I had the stabilization surgery last year (anchored back to the bones). Managed to tear it off again this year, and I am now just exercising the shoulder, going to gym etc., do not...
addimatty Added a reply to 2019/2020 KTM 450 first top end maintenance according to real experience
11/29/2020 9:25am My friend has 2019 FC 450 and he changed piston after 100 hours, the piston looked perfect without any significant sign of wear etc. Dealer also mentioned it would be possible to easily put 150 h on the piston without doubt. Just clean/change your air filter regularly and change engine oil each 5 hours.
greg570 Liked a reply to forum topic 2019/2020 KTM 450 first top end maintenance according to real experience
11/29/2020 9:21am
150 hours....piston looked like new...
This forum topic has 46 replies.
KTMmarkus Liked a reply to forum topic 2021 Rockstar edition/2022 models
11/28/2020 3:19am
Of course he doesnt. Its a nice bait though
This forum topic has 9 replies.
addimatty Added a reply to 2021 Rockstar edition/2022 models
11/26/2020 1:16am do you know smth more than we? So could you elaborate more haha?
addimatty Started a new thread 2021 Rockstar edition/2022 models
11/25/2020 3:42am Hello! Has anyone heard anything about 2021 Rockstar edition/2022 husqvarna FC models? I have talked about 2022 models with the local dealer and they said that in 2022 there should be completely new models relased, but not sure if thats true?
This forum thread has 9 replies.
Dirty Points Liked a reply to forum topic 07CR250R STOLEN in Chester NY -FULLY RESTORED TO NEW
10/9/2020 7:21am
Dude, please give the ad another read before going vigilante on it. That's a wanted ad, with a screenshot of Google image search for CRs. Two of the pictures are 2002s, and two are thumbnails for a Youtube video from 2017 That guy is hoping to buy a CR, not sell one. He also doesn't know what he wants, given that he says he wants his CR250r to be a 4-stroke, '07 or newer (there are no CR250R newer than '07).
This forum topic has 72 replies.
Chance1216 Liked a reply to forum topic 07CR250R STOLEN in Chester NY -FULLY RESTORED TO NEW
10/9/2020 7:21am
Can I ask why you keep posting about your bike? If you know or feel that's your bike, why aren't you there with a truck and loading ramp ready to take back what's potentially yours? I had an 87 CR 125 stolen years ago before Facebook, Craigslist or any other social media. You have an advantage. If that bike popped up anywhere and I felt it was mine, I wouldn't be posting anything other then pics of it back home in my garage.
This forum topic has 72 replies.
Lightning78 Liked a reply to forum topic 07CR250R STOLEN in Chester NY -FULLY RESTORED TO NEW
10/8/2020 9:34am
I'd just go down there to see if it's yours and crack some skulls if it is and take it back.....the police wont help you
This forum topic has 72 replies.
addimatty Added a reply to 07CR250R STOLEN in Chester NY -FULLY RESTORED TO NEW
10/8/2020 5:02am shiiit, sounds interesting! I would try to get detective involved. If not then get my buddy to call and inquire about the bike without specific questions and just say that wanna try some dirt bikes and considers this would be a good bike to start with.. I would love to pay a visit to them 
tzmike Liked a reply to forum topic 07CR250R STOLEN in Chester NY -FULLY RESTORED TO NEW
10/8/2020 5:00am
Well well. A mint 07CR250 was posted on FB marketplace. AND it's located in the same town as the old tenant. Fingers crossed for me guys. I forwarded the post to the detective. I hope I dont get a let down but it's too COINCIDENTALLY the same looking bike with the stock pipe removed and a PC pipe (brand new) in its place. All your suggestions and support are nothing but helpful and help ease my anxiety.
This forum topic has 72 replies.
addimatty Started a new thread Repairing damaged cams: FC 350 running without oil..
10/5/2020 10:22pm Hey! So I had unfortunate situation yesterday as I went for a race, did qualification, all good. Before going to 1st moto checked the oil level (as I changed it in the previous evening before race day), the level was perfect. But then after 6 minutes in moto 1 the engine became quite loud and I could not figure out...
This forum thread has 25 replies.
addimatty Added a reply to Repairing damaged cams: FC 350 running without oil..
10/5/2020 10:22pm I think it should be fine, as the clutch was still soaking in oil and there were some oil still on crank, cases, rod so also transmission most likely had some residual oil still there.
addimatty Added a reply to Repairing damaged cams: FC 350 running without oil..
10/5/2020 1:25pm Hey guys. So I went to dealer today, spoke with the mechanic and he confirmed that new head is a must. Showed him cams, he told that its no big deal and I can try to clean them up home. So I did, bought scotch brite very fine (360grit) and ultra fine (1500grit), and cleaned them up. Took like 10-20...
addimatty Added a reply to Repairing damaged cams: FC 350 running without oil..
10/3/2020 11:20am Hey guys! So I finally had a look into engine .. Im a bit surprised as bottom end does not need rebuild, at least judging by that it spins freely, there is no feel that smth is damaged + there are still signs of oil on crank, rod, cases after running 4 minutes dry.. seems like I will stick with...
addimatty Added a reply to Repairing damaged cams: FC 350 running without oil..
9/30/2020 2:13pm Thanks for information!
Tuna Liked a reply to forum topic Repairing damaged cams: FC 350 running without oil..
9/30/2020 2:13pm
CV Tech. They are the big guys in Canada that replate cylinders and rebuild cranks.
This forum topic has 25 replies.
addimatty Added a reply to Repairing damaged cams: FC 350 running without oil..
9/29/2020 10:39pm Dooh, crazy. Hopefully your bike will be fine!