All

Ive got a 2006 drz125l and some guy is willing to trade me his 97 cr125 is that a sound deal?

Back in may I got a rm125 in hopes of restoring it. i took it completely apart including engine and then I broke my collar bone and I was unable to work on it. Now since it was so long since I took the bike apart i cant remember how everything goes back together. I need advise on what I...

does anyone know if a 93 head will work with a 89-91 rm 125 cylinder?

I just bought a brand new yz450 last week and just broke it in. So i changed the oil and oil filter and put all the drain bolts back in. After all the bolts were put back in i started it up and noticed oil was leaking from the drain bolt under the left foot peg. I figured if i...

I am rebuilding a rm125 bottom up and when I came across the transmission i noticed some gears with groves on top of the teeth and some with a slight grove on the edge and was wondering if thats bad and should i just replace them while i have the motor apart or should it not be a problem?

cleaning out the carburetor on 95 cr250r and anti freeze was found in it is that normal?

Can any one tell me how to fix the wire on an ignition coil wire with the sparkplug cap cut off?

I have a 95 honda cr250r and when I shift from neutral to first(while holding in the clutch lever) it makes the bike jolt slightly almost as if it wants to take off but it shifts into every other gear smoothly

How do you remove the pin bolt from the shiftdrum? The only thing i seem to be doing is stripping the pinbolt.

let me know what you need almost everything is there.

I ve got a 1990 suzuki rm 125 and im just lookin to restore and sell. So im wondering would it be worth more restored to its original look or to a more modern look?

How do you remove residue left by gaskets without ruining the sealing surface?

I have a 1990 suzuki rm 125 and was wondering if anybody could tell me whether or not a 2002 rm 125 rear shock would fit it

does anyone know where i can find some nice graphics for a 92yz250 other than the stock ones?

I am restoring a 1990 suzuki rm125 and would like to know what the best way to fix a frame with dents on the bottom. Also besides powder coating what other approaches can i take to paint the frame and make it look new again?

Are dirt bike wheels made specifically for certain bikes or do they fit universally as long as they are the same sized rim?

How do you tighten loose spokes?

I badly stripped the threads for a screw that holds the bearing holder inside the cases and was wondering how i could fix the threads