Hi everyone, if you are looking to upgrade a front brake on your YZFs with a KTM Brembo calipers, there are adapters / hangers available, CNC machined from a billet aircraft grade 7075 aluminium. They definitely fit YZ250F YZ450F from 2016 onwards, WR250F 2020- WR450F 2019-, and I'm not sure yet about YZ (will find out and update shortly) and other models. KTM calipers from 2010-onwards. In the photos you can see how much wider the brake pads are for a Brembo caliper. I offer only an aluminium adapter / hanger, you can either use your Yamaha studs / pins and rubbers or KTM ones but it works best with KTMs retaining plate, clips nicely straight on, also Yamaha one fits however needs two little wings straightening. Also the KTM caliper uses a M10x1.0 banjo bolt, different to Yamaha one. Price for the adapter is £60 or $75 plus shipping, I'm based in the UK, can ship worldwide. Drop me a message if you are interested. Thanks
The Shop
DeCal Works Huge Plastic Inventory of UFO and Polisport kits.
Luxon 4-Post Bar Mounts
$189.95 - $239.95
Free shipping: VITALMX
Hey Otofifo, this look like a great part for YZ owners. Would suggest that you make the same post in the Bazaar (For Sale) section for some greater visibility.
Looks pretty good to me. Maybe add some lightening pockets similar to stock and do an anodize run to finish it up (7075 doesn't like corrosion much), but it's your product, not mine!
We haven't found the time to work on this like I had hoped, and likely won't for quite some time (busy with our other products), so I'll pass on this info to those who were asking us to make them!
Thank you YZed250, I will do that, I'm new on the forum, appreciate your advice 👍
Thank you for suggestions, I'll take them and appreciate if you would pass the infos, great stuff. I found 7075 bare surface holding really well on as a adapter on my KX but still good shout with anodizing, I'll ask around for it and add it to offer. Thank you again
I am interested in a Brembo adapter for my 2025 YZ 250 FX , what's the best way to reach you? You can text me at 209-770-0816 or my e-mail at Loren@Kaisersautosmog.com thank you!!
Thanks for interest! I've emailed you but just in case for anyone else best way to reach me is at my email otofifo@gmail.com
Thank you!
Filip
what years brembo caliper does it work with?
2010 onwards
Just installed the adapter on my Fantic XX250 2 stroke. Went out riding tonight for the first time and I can say that it is pretty amazing with the Brembo!
Much better brake control on the front, than compared to the Nissin set.
Thank you so much Otofifo (Filip) for making these adapters!
Hello, I have a 2007 YZ250 that I want to fit a brembo caliper on. Can someone tell me the difference between 2007 & 2008 brake carrier adapters. I assume the bolt distance is different. I have 270mm rotor. Is a bolt on brake carrier adapter for brembo available for 2007 YZ250 ?
Thanks,
Jurgen
Belgium
Ive been trying to get back in touch witj Otto. Haven't heard back. Anyone have updates?
In the mean time i bought a 320mm sxf carrier from Ali and with a little machining it worked 😃. I had to relocated and tapped 3 holes and machined off exess material.
Post a reply to: Yamaha YZ250F YZ450F - KTM Brembo brake adapter/hanger