Posts
3
Joined
11/29/2019
Location
Santee, CA
US
Im currently restoring a 79 CR250 Honda and want to keep the original forks. I don't want to change out the forks. As I recall back in the day there was a mod you could do to the damper rod. i think you drilled a 1/16 hole 1in up from the existing hole. This was a MXA tech tip. I'm wondering if anyone has knowledge of any other mods to these forks to improve them besides stiffer springs and air caps? RaceTech does not have gold valves for these..
I have a pair of air caps on CR forks from a bike parted out.
Check YSS, they may have emulators for your forks
Have not done the Honda Model specifically, but I would suggest a call to Noleens. Clark supports the vintage community very well.
https://www.noleenj6.com/
Yea Im going to check with Clark since he was with MXA back in the day and he would remember. Im getting the shocks from him too.
The Shop
Free shipping: VITALMX
Luxon 4-Post Bar Mounts
$189.95 - $239.95
I had a 76 KX125 I wanted to swap out the fork internals with MTB internals.
are you selling them?
Yes. Interested in forks or caps?
Post a reply to: Fork mods on original 78-80 CR250s