Posts
105
Joined
8/22/2019
Location
Chardon, OH, USA
I've been looking for some lowered and rear offset pegs to open up my 23' 350sxf up a bit. Usual options are Fastway and Flo Motorsports. Fastway says the new bikes only offset rearward and keep OE height so those are out. Flo does not have a lowered peg for the new chassis. Any other options? Ideally 10-15mm lower and 10mm back would be great.
I’ve seen some nice stainless ones on eBay that you can get in different offsets
https://www.motoes.net/product-page/foot-pegs-stainless-tbi-ktm-husky-g…
Not sure if there's a US seller, but they're a European company and have a UK seller and also sell on eBay.
Mitigator do some 5mm down 5mm back for the current gen KTM.
I have some of their previous generation ones. Not as pretty as the Ti offeringa but certainly pointy Bois and definitely lower and further back as advertised unlike others I tried. Apologies for the shitty photo
Carapaks are very common in Europe... there are several versions available and quality and price is very good, also for hard enduro use in rocks, etc...
Stainless Steel Foot Pegs KTM TBI MY2023-2024 XC/MX - Carapaks
The Shop
Luxon 4-Post Bar Mounts
$189.95 - $239.95
DeCal Works Huge Plastic Inventory of UFO and Polisport kits.
Free shipping: VITALMX
Thank you. I have not found any for the latest gen bikes. Tons of options for the 22 and older bikes.
I love the looks of those but I had a set of Raptors that destroyed my boot soles. The saw teeth are just too much. Lol. I like the screw pins like Fastway and Flo because they grip just as well but way less boot wear. Thank you for the suggestion though. Those do look badass.
Oh wow! Never seen these guys before. They have some really nice enduro parts! -10mm/-10mm stainless pegs for $109! That's hard to beat. Thank you!
My guilty pleasure is Raptor Apex shipped to UK from UK. They have loads of options in the drop downs, I went with 5mm down, 10mm back. I run size 10,11 and it makes shifting easier and opens up the bike. I think it also makes the shock a little better by shifting the weight back and putting more leverage on the back end.
Some great options here that I didn't know about when I got the raptors.
+1 on the Raptors
Have they actually changed the mount from the previous 2 gens? I would be surprised if they did, as the last 2 gens had quite horizontal mounts compared to pre-'16. Although it does push lowered pegs more rearward than downward, it still puts you in a really comfortable standing position I find. This is coming from an enduro riders perspective though, so not sure if there's some negatives to having the pegs too far back from a motocross perspective
Yes the 23+ footpegs mount different and are all new pegs. I actually love the new stock pegs just need more space. I'm 6'6".
Any recommendations on offset for someone 6 ft 2 in, size 13 boots. Ride enduro, hare scrambles near the front of B class. I ride a 23 fx350.
On my 19 fc350 i had the flo pegs that were 12 mm lower but was curious what others have seen sucess with as far as moving pegs back and down or just one of those
I am 6'3" and purchased a set of Flo lowered pegs a while back for my '23 350SXF and just tried putting them on. Same height as stock pegs on the bike so stock ones going back on.
Some of the links posted look like pretty good options , thanks.
On my last 2 bikes I machined new mounts and welded them on my frames down and back to open things up. 2000 KX250 and a 2005 RM250 but this 23 KTM feels bigger to start with so going to try pegs first.
Post a reply to: 23/24 KTM lowered footpeg options?