1989 CR250

bgardner119
Posts
8
Joined
2/1/2023
Location
Pittsburgh, PA, USA

March 11, 2023, I woke up at 5 am. to start my drive from Western PA to South of Detroit MI to purchase my first restoration project. A bucket list item was to race the High Point Vet National on a CR from the same year I was born. This was hands down one of the most enjoyable project I have taken on! Next build build I will make sure I take more photos to document the progress but here is what I have to share! image-20230929111545-2

image-20230929111604-3

image-20230929111635-4

image-20230929111650-5

image-20230929111713-6

image-20230929111730-7

image-20230929111748-8

image-20230929111807-9

image-20230929111835-10

image-20230929111856-11image-20230929111920-12image-20230929111929-13image-20230929111948-14image-20230929112004-15

11
|
bonseff
Posts
2139
Joined
3/29/2011
Location
Frisco, TX, USA
9/29/2023 8:41am

Beautiful! I did an 89 125 a few years ago. Agreed, it was an enjoyable experience.

Pat327
Posts
688
Joined
2/18/2008
Location
USA
9/29/2023 6:25pm

She's an absolute beauty! I really like the authentic 1989 look! I was born in '89 too and have always wanted to do the same thing with a clean 1989 CR125.

One small thing I noticed: your front brake line should be routed on the other side of your fork guard.

Beautiful work! Have fun ripping it!

romain524
Posts
755
Joined
1/14/2015
Location
Newport Coast, CA, USA
9/29/2023 10:09pm

Nice! The bike didn’t seem in bad shape to start with really.

Did you ride it yet? I know that bike is notorious to have bad forks.

If I get a 1989 I would like to do a JMB GP250 theme bike since he was world champion that year.

TooOld4WFO
Posts
673
Joined
4/1/2018
Location
Fresno, CA, USA
9/30/2023 9:34am

If you sprayed that motor as complete you did an outstanding job. My approach would have been to spray the silver first and then tape off the top. Silver overspray on the motor lower no big deal. Now spray black. Doing this would require some very time consuming taping off.

Anyways you did an incredible job on this bike. Super clean for your first one. You must have some background in mechanics or similar.

Great job on your images also. Love it.

1

The Shop

bgardner119
Posts
8
Joined
2/1/2023
Location
Pittsburgh, PA, USA
10/2/2023 5:17am
romain524 wrote:
Nice! The bike didn’t seem in bad shape to start with really. Did you ride it yet? I know that bike is notorious to have bad...

Nice! The bike didn’t seem in bad shape to start with really.

Did you ride it yet? I know that bike is notorious to have bad forks.

If I get a 1989 I would like to do a JMB GP250 theme bike since he was world champion that year.

I actually rode it for the first time yesterday at the High Point Vet National! In Practice I was ready to load the bike up and go home. lol! After running some clickers out and some other adjustments it turned out to be a pretty enjoyable day. Another day of test and tune I'm sure it will be a fun bike to have!

bgardner119
Posts
8
Joined
2/1/2023
Location
Pittsburgh, PA, USA
10/2/2023 5:22am
TooOld4WFO wrote:
If you sprayed that motor as complete you did an outstanding job. My approach would have been to spray the silver first and then tape off...

If you sprayed that motor as complete you did an outstanding job. My approach would have been to spray the silver first and then tape off the top. Silver overspray on the motor lower no big deal. Now spray black. Doing this would require some very time consuming taping off.

Anyways you did an incredible job on this bike. Super clean for your first one. You must have some background in mechanics or similar.

Great job on your images also. Love it.

Thank you! The head actually isn't painted. All the bare aluminum, I sand blasted then changed out the sand with fine glass beads on a low PSI which polished the aluminum making it look pretty much like new. I sealed the motor (risky) and put the whole thing in the blast cabinet. 

sandman768
Posts
8304
Joined
3/21/2014
Location
Saratoga Springs, NY, USA
10/2/2023 6:02am

I rebuilt a very low hr 89 that had a rotted water pump case. I installed Race Tech stiffer springs & new oil in the forks. I wanted to leave the stock parts on the bike as I knew I would not be racing it that much. On a smooth track the forks are ok, can even handle decent sized jumps. The Achilles heel is square edged/ choppy hits…this bike was built to be an SX bike 100%. I always thought the 89 was a top end engine, but after riding/ racing it, it was more low end midrange engine. Before I raced Unadilla rewind,  I pulled my new Pc pipe & silencer off and installed a used FmF gnarly pipe, which accentuated the low end midrange even more. My bike runs much better with the PC pipe. O/a the build quality and engineering of the 89 Honda’s were light IMG 5258 0.jpeg?VersionId=o VjPbhuUaGyears ahead of anything else at the time. 

6

Post a reply to: 1989 CR250

The Latest