Suzuki RM250 Project

My understanding is there is only two mfg. that can wind Ti springs properly and provide consistent spring rates, I believe they are both in japan, Yamaha uses this company to provide springs for their bike line

Here is a picture of my 01 125. This was Danny Smith's outdoor practice bike. It came with the Factory suspension that is amazing! I'm in the middle of doing a frame up build on a 78 YZ 100. After that, this is going to get a complete rebuild!

One of the posters in this thread turned out to be a thieving, scamming piece of shit who sold parts he never had and was paid for work he never performed (allegedly) lol. The guy deleting his comments was giving his opinion of said (alleged) scamming piece of shit lol.

Ok, so here is the bike as it is now. Unlikely that more updates will be done soon ... But if it changes then I'll document here. So ONE Infustries factory seatcover, PC Ti pegs and clamps. Yes, there are other details that make these replicas so rewarding and frustrating. Need to mount the PC Works pipe, use a bored RG3-OEM top/bottom clamp combo, white plastic fork guards. I have all of these but no time.

Post this under vital.mx bike check! Win bike of the month!

Thanks, dbrunski! I just may do that here shortly. I've changed a couple of details to make it closer to the real McCoy, like going to white fork guards and I FINALLY found a correct Pro Taper red bar pad. Had been looking for years for that one!

Take lots of quality photos tho. To show off coated cases, calipers etc !!! Show off all the hard work

Will do, thanks.

Looking for a One Industries 02 SoBe kit and seatcover. The Blimpie team kit will also work. 281-750-1705

Very nice build!

2 questions (sorry if they have already been answered):

1. what front rotor is used?
2. What carbon ignition cover is used?

Many thanks

1. Front rotor is a 280mm EBC Kit. I had several of these but sold them to a FB buddy. The circular pattern has for some time been NLA. EBC sponsors Pastrana so I believed it would be a good fit. I don't know if my friend would want to sell one of my former kits but contact me via text and I'll try to get the two of you connected.

2. Got the CF ignition cover from the same place I got the Mg outer case cover and works Michelin rear tire.

Last photos ever, sold bike Saturday.. mounted correct triples, real team front plate with verified Pastrana autograph. Some other details also but it is gone.

Can't believe this. Hope you got some good money for it. I'd say that bike should range in the 7k and up price tag.

I think I own this bike now, 

where did you get the 199 power valve cover