Posts
694
Joined
6/9/2020
Location
Orange City, IA, USA
Does anyone have a good cylinder and crankshaft from a 87-88 RM125. My cylinder is bored to the limit and cannot find a sleeve. I also sent my crank to get rebuilt but was told the hole was oval and cant be rebalanced.
Did you contact LA Sleeve or Wiseco? You'll likely need to speak to them directly.
A friend recently had a sleeve made for an obscure Penton by Wiseco.
https://powersports.wiseco.com/
https://www.lasleeve.com/
Have spoke with both of those and also ProX. Seems as though the story is the same with all and its a no go. I have also bought two other sleeves from smaller companies who thought they had one and both were 86ish models as there was no holes in them for the reed valve.
I sent you a pm on one I found locally to me but it might be to far and it's a whole bike. It's also an 88 even though the ad is wrong.
Post a reply to: 1988 RM125