MC350/FC350 compatibility

cwel11
Profile picture for user cwel11
Posts
2755
Joined
12/4/2019
Location
Orangeville, PA, USA
cwel11
Edited Date/Time 4/25/2023 6:15am

Does anyone know what parts (if any) are interchangeable from 22FC350 to a 23MC350? Ideally forks, levers, vortex, wheels, and seat would be nice. 

|
wrc777
Profile picture for user wrc777
Posts
3225
Joined
5/21/2020
Location
Greenwood, IN, USA
Fantasy
160th
wrc777 4/25/2023 6:21am
4/25/2023 6:21am

Seat won't fit at all. It has a completely different mounting system. FC350 stock forks are 10mm shorter (linkage and shock are a little different too) than KTM/gasgas in 21-24. Plastics, subframe, and fuel tank are completely different too.

Everything else should fit assuming both have Brembo master cylinders. I heard some gasgas were shipping with braketec. If so the levers probably won't fit.

ECU tuning might be a little different depending on the tuner who put the maps in. Contact the specific tuner to find out.

FGR01
Profile picture for user FGR01
Posts
6139
Joined
10/1/2006
Location
USA
Fantasy
888th
FGR01 4/25/2023 6:21am
4/25/2023 6:21am

22-FC forks are shorter and not a direct swap.   You can swap the forks over if you also do the shock and linkage but then the MC will be short just like the FC.

Brake lever will swap as long as the MC is not the BT (BrakeTec) model bike.  Clutch....  did the 2022 FC got o a Brembo master?  I only have 20/21 FC's here which all have Magura masters that won't swap to an MC.

Vortex should swap direct with same mapping.  If you look at the sheet from XPR I believe it lists all the model 350's it is mapped for.

Wheels -direct.

Seat -no chance.

FGR01
Profile picture for user FGR01
Posts
6139
Joined
10/1/2006
Location
USA
Fantasy
888th
FGR01 4/25/2023 6:22am
4/25/2023 6:22am
wrc777 wrote:
Seat won't fit at all. It has a completely different mounting system. FC350 stock forks are 10mm shorter (linkage and shock are a little different too)...

Seat won't fit at all. It has a completely different mounting system. FC350 stock forks are 10mm shorter (linkage and shock are a little different too) than KTM/gasgas in 21-24. Plastics, subframe, and fuel tank are completely different too.

Everything else should fit assuming both have Brembo master cylinders. I heard some gasgas were shipping with braketec. If so the levers probably won't fit.

ECU tuning might be a little different depending on the tuner who put the maps in. Contact the specific tuner to find out.

Holeshot!!  

1
wrc777
Profile picture for user wrc777
Posts
3225
Joined
5/21/2020
Location
Greenwood, IN, USA
Fantasy
160th
wrc777 4/25/2023 8:04am
4/25/2023 8:04am
wrc777 wrote:
Seat won't fit at all. It has a completely different mounting system. FC350 stock forks are 10mm shorter (linkage and shock are a little different too)...

Seat won't fit at all. It has a completely different mounting system. FC350 stock forks are 10mm shorter (linkage and shock are a little different too) than KTM/gasgas in 21-24. Plastics, subframe, and fuel tank are completely different too.

Everything else should fit assuming both have Brembo master cylinders. I heard some gasgas were shipping with braketec. If so the levers probably won't fit.

ECU tuning might be a little different depending on the tuner who put the maps in. Contact the specific tuner to find out.

FGR01 wrote:

Holeshot!!  

Haha got ya!

1

The Shop

See All »
cwel11
Profile picture for user cwel11
Posts
2755
Joined
12/4/2019
Location
Orangeville, PA, USA
cwel11 4/25/2023 9:21am
4/25/2023 9:21am

Thanks guys. 22 FC is all Brembo. Running ARCs and like to keep them. I have the ohlins spring conversion and like the lowered Husky so I’d probably swap out suspension. I sent an email to XPR to double check on the ecu. Thanks again 👍🏻

wrc777
Profile picture for user wrc777
Posts
3225
Joined
5/21/2020
Location
Greenwood, IN, USA
Fantasy
160th
wrc777 4/25/2023 11:44am
4/25/2023 11:44am

You will have to check part numbers and see how much of the linkage and knuckle you need to transfer but it should all bolt up the the gasgas. Did ohlins shorten the fork and make the shock changes to work with the lowered husky?

cwel11
Profile picture for user cwel11
Posts
2755
Joined
12/4/2019
Location
Orangeville, PA, USA
cwel11 4/26/2023 3:05am
4/26/2023 3:05am
wrc777 wrote:
You will have to check part numbers and see how much of the linkage and knuckle you need to transfer but it should all bolt up...

You will have to check part numbers and see how much of the linkage and knuckle you need to transfer but it should all bolt up the the gasgas. Did ohlins shorten the fork and make the shock changes to work with the lowered husky?

I just have the Ohlins internals 

Post a reply to: MC350/FC350 compatibility