MX companies I should support.

This is truth.... used to dig klim.... not so much now days... got too big and started doing it for the gram, and not for the betterment of the consumer....

You’re most likely right.

All these years later I will still buy Peak antifreeze…

I too found Bubba Burgers from their racing sponsorship. They are pretty good , and I would say they are better than some fresh premade patties I have had. And super easy to cook. Take them out of the freezer and throw onto the grill, flip a few times, measure the temp and they are done when 161 degrees inside. You can tell when they are done because they start to firm up. They say NOT to press down on them to push juices out. And I've followed the directions and they come out great and You can buy 20 at BJ's or your favorite wholesale club and cook them as you want with no worries of them going bad. The people I have spoke with at Ride Engineering sound like they ride. My Parts Unlimited Rep rides and most of the people that work there ride or race. I think that any outside industry company that gets involved with a team or series is worth giving a shot when they have an item that You want or need.

So I’m Kip, owner of AOT.
As far as being involved…. we not only sponsor a ton of riders, from true beginners to Loretta podium riders and pros, but have also ran race series giving back to the tracks and riders. I believe it was only series in Texas to ever give EVERYTHING back.
We are veteran owned where I’m a member of VetMx and ride 2-3 times a week!!
I really try to separate what we do in a few ways.
I do releases almost weekly. (300+ gear variations) in our 2nd full year. We listen to the riders on design, products, fit etc.
We also do so much more than gear-
Goggles
Gloves
Board shorts
Riding socks
Hats
Umbrellas
Apparel
Sun hats
Canopies
List goes on.
We are at a few major nationals to support our riders (ll/ding/Ponca/js7)
We’ve teamed up with some killer companies to bring their products to our riders and potentially save some cash.
Bell
6D
OGIO
Altus
Senge
Alamo Cycles

We hope to keep expanding our line and are close to releasing a few new materials for pants.

Again we appreciate all of you tagging us!!
Feel free to apply here or on Hookit
Www.Aotracing.com

Big time in snowmobile

Has anybody said Renen yet? USA made I believe as well as owned by somebody who bleeds moto. That said, I just bought some FXR stuff and it’s really nice too.

Luxon, even just for what they post here 👌
Plus I like hearing the engineering and design reasons behind their products, and other things, laid out honestly in public.

I don't know enough to make the stuff myself, but I know enough to know when something is legit or when it's just some salesman spiel or snake oil, and I've never heard the latter from them.

Fasst Co. They are an awesome company run by rad people, and their products are top notch. I put Flexx bars on every 2-wheeled contraption I have (and my hands and wrists are thankful).

The behind-the-scenes stuff they've done for Skyler Howes' journey from privateer scrapper to Factory Husqvarna rally raid dude is awesome as well.

TAGMX-very good at communicating, I'm currently getting suspension work done, Cerakoting and powder coating done by them. Also had them look over an engine I built to make sure I didn't mess anything up.

Rocket Exhaust-Seem a lot better now with new ownership

Tom Morgan Racing-Does great work, communicates if he has a backlog

Tokyomods- Good at communicating as well, been happy with everything I've bought and had done by them.

Bubba Burgers- Big fan of them, they're good!

Motosport- Pretty good pricing, I can use Rakuten with them and they offer a military discount, pretty fast shipping too

CRF's Only-Usually good pricing as well and have a forum

I was all in thinking that would be my gear moving forward until I ordered my first set and it was on sale even though it had only been released a month before. Not sure if it was on sale because of a production issue they didn’t want to admit to but the pant leg gets noticeably tighter mid thigh, like an hour glass amount of shape difference. Top and bottom of the thigh is good and calves are good but the middle of the thigh is abnormally tight and I can’t raise my legs. Have tried to ride in them three times and end up taking them off and putting my fly back on for the rest of the day.

We got a 1st time winner, correct answer

is it really tho?

I like what RENEN and CANVAS are all about

Torc1 is a local company, I've ran their levers on several bikes. Was at Greenville one day and a guy came up to me in the pits and started talking about my bike, he was asking about the levers and how I liked them, turned out to be the owner. Pretty cool.

I had a order get messed up through Bel Ray about twelve years ago, called and left a message. Got a call back, lady on the phone was apologetic, and asked what size shirt and hats I wore. She said she would get the shipment ready herself and have it overnighted and to keep what they sent, it wasn't even anything I was in need of. I was very appreciative of it, and I asked if there was anyone I could talk to about it, I was amazed by their support. She said "They would send you to me, I'm the CEO". I don't remember her name sadly, but that was enough for me to always use their products.