Kawasaki Kxf pro circuit triple clamps. $425

Factory Dick
Profile picture for user Factory Dick
Posts
1150
Joined
9/27/2018
Location
Germantown , MD US
Factory Dick
Edited Date/Time 3/1/2022 5:54am
Pics uploaded soon.
3
|
ericgst
Profile picture for user ericgst
Posts
128
Joined
1/6/2022
Location
Brooksville, FL US
ericgst 2/19/2022 2:37pm
2/19/2022 2:37pm
Those say AKit so they are likely 55mm upper clamps not 54mm like stock. They would go great with the forks I’m selling 😀
Factory Dick
Profile picture for user Factory Dick
Posts
1150
Joined
9/27/2018
Location
Germantown , MD US
Factory Dick 2/20/2022 7:45am
2/20/2022 7:45am
Bump $399 price reduced
crc245
Profile picture for user crc245
Posts
1325
Joined
10/29/2007
Location
Yorba Linda, CA US
crc245 2/20/2022 9:05pm
2/20/2022 9:05pm
ericgst wrote:
Those say AKit so they are likely 55mm upper clamps not 54mm like stock. They would go great with the forks I’m selling 😀
Good eye; wonder if OP can measure and post actual sizes of top and bottom bore...

The Shop

See All »
Factory Dick
Profile picture for user Factory Dick
Posts
1150
Joined
9/27/2018
Location
Germantown , MD US
Factory Dick 2/23/2022 5:44pm
2/23/2022 5:44pm
$375. Need out of garage !!!
1
aedwards07
Profile picture for user aedwards07
Posts
944
Joined
5/17/2008
Location
st cloud, FL US
aedwards07 2/24/2022 4:21am
2/24/2022 4:21am
Also 250 and 450 clamps aren’t the same. Learned that the hard way. Those are 250 clamps.
GoggleFiend904 2/24/2022 5:29am
2/24/2022 5:29am
aedwards07 wrote:
Also 250 and 450 clamps aren’t the same. Learned that the hard way. Those are 250 clamps.
I think the stem length is the difference, correct?
dancolvin633
Profile picture for user dancolvin633
Posts
685
Joined
6/28/2016
Location
Plumas Lake, CA US
dancolvin633 2/26/2022 9:29am
2/26/2022 9:29am
aedwards07 wrote:
Also 250 and 450 clamps aren’t the same. Learned that the hard way. Those are 250 clamps.
21+ 250 and 19+ 450 are the same.
crc245
Profile picture for user crc245
Posts
1325
Joined
10/29/2007
Location
Yorba Linda, CA US
crc245 2/27/2022 2:35pm
2/27/2022 2:35pm
Factory Dick: Can you measure upper and lower bore sizes? Thanks
Factory Dick
Profile picture for user Factory Dick
Posts
1150
Joined
9/27/2018
Location
Germantown , MD US
Factory Dick 2/27/2022 2:51pm
2/27/2022 2:51pm
Yes. Give me a few minutes
Factory Dick
Profile picture for user Factory Dick
Posts
1150
Joined
9/27/2018
Location
Germantown , MD US
Factory Dick 2/27/2022 3:23pm
2/27/2022 3:23pm
I have sleeves if you need some. From team Suzuki.
1
tylerp319
Profile picture for user tylerp319
Posts
79
Joined
5/2/2019
Location
Lawton, OK US
tylerp319 2/28/2022 8:19pm
2/28/2022 8:19pm
So are these for A kit or stock 19+ 450 21+ 250??
Factory Dick
Profile picture for user Factory Dick
Posts
1150
Joined
9/27/2018
Location
Germantown , MD US
Factory Dick 3/1/2022 4:48am
3/1/2022 4:48am
A kit.
I have sleeves if you are putting standard forks in.
bm201
Profile picture for user bm201
Posts
271
Joined
11/8/2017
Location
Fairport, NY US
bm201 3/1/2022 5:54am
3/1/2022 5:54am
Coincidentally, I believe most SSS forks measure 54mm top and 59mm bottom. Someone can correct me if I’m wrong.
Factory Dick
Profile picture for user Factory Dick
Posts
1150
Joined
9/27/2018
Location
Germantown , MD US
Factory Dick 3/12/2022 9:00am
3/12/2022 9:00am
Price reduction. $350 shipped to USA.

Post a reply to: Kawasaki Kxf pro circuit triple clamps. $425