22 tc 85 power valve rod

draggsxr1000
Profile picture for user draggsxr1000
Posts
32
Joined
11/5/2021
Location
Granite Falls, NC, USA
draggsxr1000
Edited Date/Time 12/24/2021 1:02pm
Guys did the first top end on our 85 today. Gotta admit this dang pv arm got me today. I’m gonna try to add a photo but how do you remove the arm from the pv? I see videos of people prying them off. Mine has a lock like clip. That’s next to impossible to get in and out. What did I do wrong other than dropping it in the motor. 🤣. Part 12 is it.
|
FarleyMX25
Profile picture for user FarleyMX25
Posts
224
Joined
10/2/2017
Location
Harrison, TN, USA
FarleyMX25 12/24/2021 11:54am
12/24/2021 11:54am
That little clip pops out a little and then slides downward to come out.
draggsxr1000
Profile picture for user draggsxr1000
Posts
32
Joined
11/5/2021
Location
Granite Falls, NC, USA
draggsxr1000 12/24/2021 11:57am
12/24/2021 11:57am
FarleyMX25 wrote:
That little clip pops out a little and then slides downward to come out.
I get how it works. But what’s the best way to put it back in.
FarleyMX25
Profile picture for user FarleyMX25
Posts
224
Joined
10/2/2017
Location
Harrison, TN, USA
FarleyMX25 12/24/2021 11:59am
12/24/2021 11:59am
Slide it up in the slot and then push it into its groove to lock it in. Always stick a rag in the hole below to prevent loosing it in the bottom end.
1
FarleyMX25
Profile picture for user FarleyMX25
Posts
224
Joined
10/2/2017
Location
Harrison, TN, USA
FarleyMX25 12/24/2021 12:00pm
12/24/2021 12:00pm
Prying the arm off is how I’ve always removed the rod also
1

The Shop

See All »
draggsxr1000
Profile picture for user draggsxr1000
Posts
32
Joined
11/5/2021
Location
Granite Falls, NC, USA
draggsxr1000 12/24/2021 12:43pm
12/24/2021 12:43pm
FarleyMX25 wrote:
Slide it up in the slot and then push it into its groove to lock it in. Always stick a rag in the hole below to...
Slide it up in the slot and then push it into its groove to lock it in. Always stick a rag in the hole below to prevent loosing it in the bottom end.
Does your head have this. Found it rather odd
FarleyMX25
Profile picture for user FarleyMX25
Posts
224
Joined
10/2/2017
Location
Harrison, TN, USA
FarleyMX25 12/24/2021 1:57pm
12/24/2021 1:57pm
I don’t have an 85 so im not sure what that is. I just know that my 250s use that same rod and clip design in their power valve also.
FGR01
Profile picture for user FGR01
Posts
6131
Joined
10/1/2006
Location
USA
Fantasy
908th
FGR01 12/25/2021 9:12am
12/25/2021 9:12am
That is a QR code that must be used in the production line. They all have it and it gets burned or cleaned off after some time.

Post a reply to: 22 tc 85 power valve rod