89 CR250R Bottom end rebuild

Justink437
Profile picture for user Justink437
Posts
14
Joined
3/10/2019
Location
Loose Creek, MO, USA
Justink437
I purchased an 89 cr250 about a month ago and started going through it. Unfortunately when I pulled the cylinder and piston I found that the crank rod had some up and down play and what seems like excessive side to side movement. I think I am going to just try to keep the bike and get it fixed instead of buying another used one so at least I will know what I have then. Where would be the best place to send my engine to for a bottom end rebuild? Thanks
1
|
willbilly
Profile picture for user willbilly
Posts
408
Joined
6/28/2016
Location
Corpus Christi, TX, USA
willbilly 10/5/2021 5:07pm
10/5/2021 5:07pm
I would split the cases myself and send the crank for a rebuild by Crank Works or similar company. There should be tutorials on bottom end rebuild on YouTube. Good luck.
Justink437
Profile picture for user Justink437
Posts
14
Joined
3/10/2019
Location
Loose Creek, MO, USA
Justink437 10/5/2021 6:16pm
10/5/2021 6:16pm
I have spoken with Eric Gore Racing and I think I am going to send it to him to go through so I know that everything will be good to go and not have to worry about anything. Has anyone sent anything to them before or have any feedback about them?
1
sandman768
Profile picture for user sandman768
Posts
8173
Joined
3/21/2014
Location
Saratoga Springs, NY, USA
sandman768 10/6/2021 5:20am
10/6/2021 5:20am
Look into TMR.. Tom Morgan. 100% professional and many satisfied customers, including myself.

Post a reply to: 89 CR250R Bottom end rebuild