Triple clamps 2019 yz250f

mdlynch86
Profile picture for user mdlynch86
Posts
32
Joined
1/28/2020
Location
Cohutta, GA, USA
mdlynch86
I'm looking to get a little better cornering out of my'19 yz250f and I'm considering some new clamps. Does anyone know what the stock offset is? And what offset is best for increasing turning?
|
Motofinne
Profile picture for user Motofinne
Posts
11627
Joined
1/4/2014
Location
FI
Motofinne 1/28/2020 9:18pm
1/28/2020 9:18pm
The stock offset is 22mm. I would strongly recommend that you buy the Xtrig ROCS Pro clamps with an adjustable offset (20-22mm). With those clamps you'll be able to try out the 20mm setting for sharper cornering and go back to 22mm if you don't like it. They also have probably the best bar mounts on the market and the largest range of adjustability.

They aren't cheap but you get what you pay for. I have them on my 2020 YZ250F.
1
mdlynch86
Profile picture for user mdlynch86
Posts
32
Joined
1/28/2020
Location
Cohutta, GA, USA
mdlynch86 1/29/2020 5:54am
1/29/2020 5:54am
Motofinne wrote:
The stock offset is 22mm. I would strongly recommend that you buy the Xtrig ROCS Pro clamps with an adjustable offset (20-22mm). With those clamps you'll...
The stock offset is 22mm. I would strongly recommend that you buy the Xtrig ROCS Pro clamps with an adjustable offset (20-22mm). With those clamps you'll be able to try out the 20mm setting for sharper cornering and go back to 22mm if you don't like it. They also have probably the best bar mounts on the market and the largest range of adjustability.

They aren't cheap but you get what you pay for. I have them on my 2020 YZ250F.
Can you tell a significant difference with the new clamps?
Motofinne
Profile picture for user Motofinne
Posts
11627
Joined
1/4/2014
Location
FI
Motofinne 1/29/2020 7:35am
1/29/2020 7:35am Edited Date/Time 1/29/2020 7:38am
Motofinne wrote:
The stock offset is 22mm. I would strongly recommend that you buy the Xtrig ROCS Pro clamps with an adjustable offset (20-22mm). With those clamps you'll...
The stock offset is 22mm. I would strongly recommend that you buy the Xtrig ROCS Pro clamps with an adjustable offset (20-22mm). With those clamps you'll be able to try out the 20mm setting for sharper cornering and go back to 22mm if you don't like it. They also have probably the best bar mounts on the market and the largest range of adjustability.

They aren't cheap but you get what you pay for. I have them on my 2020 YZ250F.
mdlynch86 wrote:
Can you tell a significant difference with the new clamps?
I haven't actually tried the 20mm setting at all because i don't want to sacrifice any braking/straight line stability. The PHDS bar mounts eliminate any vibration/harshness that might occur on rougher tracks and that is awesome! I bought the clamps mainly because the bar mounts wont twist in a crash and the bar mount adjustability is large.
fourfourone
Profile picture for user fourfourone
Posts
3046
Joined
10/14/2017
Location
86oh, CT, USA
fourfourone 1/29/2020 11:35am
1/29/2020 11:35am Edited Date/Time 1/29/2020 11:40am
mdlynch86 wrote:
I'm looking to get a little better cornering out of my'19 yz250f and I'm considering some new clamps. Does anyone know what the stock offset is...
I'm looking to get a little better cornering out of my'19 yz250f and I'm considering some new clamps. Does anyone know what the stock offset is? And what offset is best for increasing turning?
what is the bike doing that you don't like? I know you say increased turning but what do you mean by that.?

What is your sag? do you have the proper spring weights(based on weight)? how far up have you slid the forks into the triple clamps. What is your riding ability? What are your current suspension setting?

Buying a 600 dollar set of clamps wont help much unless the bike is set up properly before.

3

The Shop

See All »
dirtbikefreak 4/21/2021 5:42pm
4/21/2021 5:42pm
I am getting xtrig rocs, i cant decide between PHDS and the Flexfix bar mounts...what is the difference other than the flexfix is 5mm lower?
navalseabee
Profile picture for user navalseabee
Posts
1086
Joined
5/5/2011
Location
Virginia Beach, VA, USA
navalseabee 4/24/2021 4:57am
4/24/2021 4:57am
I've got the ROCs and PDHS, I'm super happy with the vibration and shock reduction. They're a decent bit taller which takes some getting used too, but I went to a lower bar bend to help offset.
jumper23
Profile picture for user jumper23
Posts
36
Joined
4/16/2021
Location
Vero Beach, FL, USA
jumper23 4/24/2021 7:52am
4/24/2021 7:52am
how do you have your rear wheel position adjusted in relation to sag and fork to clamp position? are you adjusting sag throughout the day if not I would work the set up you have first before changing clamps
dirtbikefreak 7/11/2021 5:28pm
7/11/2021 5:28pm
How do you adjust the steering head tightness on xtrig triple clamp? Because as i understand you will have to remove the ring nut with the xtrig's
adam8781
Profile picture for user adam8781
Posts
671
Joined
12/22/2015
Location
CA
adam8781 7/14/2021 7:48pm
7/14/2021 7:48pm
im running 20mm offset xtrigs, wiht a ride engineering rear link and its 10x better than stock

Post a reply to: Triple clamps 2019 yz250f