Yamaha yz 450f 08 light build (Finished)

HyperRain
Edited Date/Time 10/12/2020 10:52am
Picked up this nice 2008 450f. Not got much planned just a fresh look,

Got new ODI grips new graphics new forks seals but one of the out tube got a little dent in it was it’s stuck but hopefully my mate can press it out with a hydraulic press then I hope I’ll just need a outer tube.

Got the new plastic but the guy sent me and 2010 250 🙈 that should be swapped over today though 👌🏻 New twist throttle as I crashed it and snapped it in half 😂










3
|
HyperRain 6/23/2020 2:11am
6/23/2020 2:11am
Got the new and right plastics for it today
2
HyperRain 6/27/2020 2:54am
6/27/2020 2:54am
Yeah just need to get the tube off see what the damage is but think I’ll have to get a new one if it’s dented

The Shop

See All »
HyperRain 6/28/2020 1:54pm
6/28/2020 1:54pm
adam8781 wrote:
keep it coming man, ive built a few full restomod older yzfs for myself and customers. love these old yzfs

06 yz250f
https://www.instagram.com/p/BjxSNCeBtUI/


06 yz450f
https://www.instagram.com/p/BQlkfRojRCM/
Nice look very well done 👌🏻 I gave you a little follow GetWrappedUK 🤙🏻
1
spimx
Profile picture for user spimx
Posts
1316
Joined
3/25/2019
Location
Port Isabel, TX, USA
spimx 6/28/2020 3:07pm
6/28/2020 3:07pm
08 was a good year for the YZ.
HyperRain 8/8/2020 4:55am
8/8/2020 4:55am Edited Date/Time 8/8/2020 4:58am
I picked up a set for good 250r front forks and made a start on the custom vinyl.





2
HyperRain 8/8/2020 4:58am
8/8/2020 4:58am
Now have a problem with the front forks 🙈 They fit but the bracket on the caliper is to big ☹️ Don’t know if I can just do a swap for a 250f caliper bracket and it would fit
HyperRain 8/16/2020 5:13am
8/16/2020 5:13am
Done the main plastics now 👌🏻


1
HyperRain 8/23/2020 7:45am
8/23/2020 7:45am
So finally after month if put and 450 and 250 fork together and fitted it. Works a dream and riding good. New plastics and other bits to but on then hopefully done

2
HyperRain 8/28/2020 3:03pm
8/28/2020 3:03pm
Ordered some new fork covers as I had new plastics, got the graphics on and add my sign in the front as it looked to plan for me

HyperRain 9/1/2020 11:36am
9/1/2020 11:36am
Well iv finally got the bike back together was a bit of a pain as the new rear mud guard was wrong so had to use the old one but wasn’t so bad as it was still in good condition. And got my a new bike stand to help 👍🏻 Still got a few little bits to do








1
HyperRain 9/6/2020 6:06am
9/6/2020 6:06am
Finished the bike off got the radiator cover on and a few little bits to finish it off 👍🏻





Polishhammer 9/9/2020 12:32pm
9/9/2020 12:32pm
They’re good bikes! You can swap the caliper mount brackets to fit the forks but it looks like you figured it out
I remember j law crushing it at Daytona on that bike
1
HyperRain 1/23/2021 4:05pm
1/23/2021 4:05pm
Polishhammer wrote:
They’re good bikes! You can swap the caliper mount brackets to fit the forks but it looks like you figured it out I remember j law...
They’re good bikes! You can swap the caliper mount brackets to fit the forks but it looks like you figured it out
I remember j law crushing it at Daytona on that bike
I ended up getting another tube from a 250f as they are the same

Post a reply to: Yamaha yz 450f 08 light build (Finished)