Crankcase flush

jdrury91
Profile picture for user jdrury91
Posts
13
Joined
5/5/2009
Location
USA
jdrury91
Edited Date/Time 1/26/2012 8:16pm
Can you flush out a crankcase with water? It seems like if a heat gun was used to dry it all out then no damage would be done
|
xnationalwrench 6/14/2009 11:23am
6/14/2009 11:23am
They make an engine flush and its like a light machine type oil. I would use something like that other than water. If you use water how can you see in the main bearings or rod bearing to make sure the water is out of them?
CYCLE WERKZ
Profile picture for user CYCLE WERKZ
Posts
28
Joined
10/10/2008
Location
Dyersburg, TN, USA
CYCLE WERKZ 6/14/2009 12:39pm
6/14/2009 12:39pm
U diesil it will clean the cases out good its cheap and you won't have to worry about drying it all out
Matt Fisher 6/14/2009 1:28pm
6/14/2009 1:28pm
On 2 strokes I just use pre-mix.
lumpy790
Profile picture for user lumpy790
Posts
11623
Joined
9/18/2007
Location
York, SC, USA
lumpy790 6/15/2009 6:12am
6/15/2009 6:12am Edited Date/Time 6/15/2009 6:13am
I dump a qt of kerosene in and start the motor and run it for a couple minutes then let it sit and drain over night.

Post a reply to: Crankcase flush