94-97 CR 125 HRC Spec Cone Pipe

IainB583
Posts
69
Joined
12/20/2020
Location
CA
Edited Date/Time 1/9/2021 5:29am
I have for sale an HRC 125 spec cone pipe as the one Lamson ran on his factory 125. I had this on my 96 125 race bike that was built by Bills Pipes. There were approximately 10 of these built by an outfit then known as Milan Racing. Pipe has light wear but no dents or cracks. $700 plus shipping


2
|
matt.3150
Posts
627
Joined
3/20/2015
Location
San Jose, CA US
12/30/2020 11:36am Edited Date/Time 12/30/2020 11:37am
Can you put up a picture of Steve Lamson works Honda CR125 with that pipe on it? Between 1994-1997. Not saying your wrong , I just don’t recall ever seeing any of the factory Honda 125!between 1994-1997 having a cone pipe on it. I could be wrong those. Here a picture of his silencer though.
1
IainB583
Posts
69
Joined
12/20/2020
Location
CA
12/30/2020 12:04pm
matt.3150 wrote:
Can you put up a picture of Steve Lamson works Honda CR125 with that pipe on it? Between 1994-1997. Not saying your wrong , I just...
Can you put up a picture of Steve Lamson works Honda CR125 with that pipe on it? Between 1994-1997. Not saying your wrong , I just don’t recall ever seeing any of the factory Honda 125!between 1994-1997 having a cone pipe on it. I could be wrong those. Here a picture of his silencer though.
You’re definitely not wrong on that. Lamson’s pipes were stamped, and this is hand welded to the specs. I’ll pull up some pics and share.
1
IainB583
Posts
69
Joined
12/20/2020
Location
CA
12/30/2020 1:21pm
Lamsons MXON
Standard issue exhaust
My 96 125 w/ said pipe

The Shop

IainB583
Posts
69
Joined
12/20/2020
Location
CA
12/30/2020 1:45pm
Oops. Wrong pic of a standard stamped pipe for market.
matt.3150
Posts
627
Joined
3/20/2015
Location
San Jose, CA US
12/30/2020 2:48pm
Ok, well ok, those pipes your selling are not HRC pipes, I guess I don’t understand what your saying then.
sandman768
Posts
7952
Joined
3/21/2014
Location
Saratoga Springs, NY US
12/31/2020 6:36am
matt.3150 wrote:
Can you put up a picture of Steve Lamson works Honda CR125 with that pipe on it? Between 1994-1997. Not saying your wrong , I just...
Can you put up a picture of Steve Lamson works Honda CR125 with that pipe on it? Between 1994-1997. Not saying your wrong , I just don’t recall ever seeing any of the factory Honda 125!between 1994-1997 having a cone pipe on it. I could be wrong those. Here a picture of his silencer though.
What’s the story in this silencer...you know Lammy? Every photo I have ever seen of the factory Honda 125”s 93-97 was either Bill”s or PC...
Ryan625
Posts
1689
Joined
9/14/2019
Location
Lynnwood, WA US
12/31/2020 9:01am
matt.3150 wrote:
Ok, well ok, those pipes your selling are not HRC pipes, I guess I don’t understand what your saying then.
Title said “hrc spec” not official hrc
2
IainB583
Posts
69
Joined
12/20/2020
Location
CA
1/1/2021 10:55am
BTT- $500
1
matt.3150
Posts
627
Joined
3/20/2015
Location
San Jose, CA US
1/1/2021 3:23pm Edited Date/Time 1/1/2021 3:25pm
matt.3150 wrote:
Ok, well ok, those pipes your selling are not HRC pipes, I guess I don’t understand what your saying then.
Ryan625 wrote:
Title said “hrc spec” not official hrc
First of all, HRC would not give out there pipe specs to Milan racing because they are not the official company that makes the pipes for HRC. In 1993 both PC and Bill’s made the official HRC pipes for the CR125 race bikes. PC did McGrath 125 national bike in 93, and Bill’s did Henry’s and Lamson’s pipes. Bill’s made the official HRC pipe till 1997 for the CR125 . So Milan didn’t have the specs for the pipe, and neither PC,Bill’s or HRC would give them the specs. Here’s Lamson’s 1994 HRC CR125R engine

8
1
worksmx
Posts
313
Joined
12/12/2014
Location
SE
1/1/2021 5:39pm
matt.3150 wrote:
Ok, well ok, those pipes your selling are not HRC pipes, I guess I don’t understand what your saying then.
Ryan625 wrote:
Title said “hrc spec” not official hrc
matt.3150 wrote:
First of all, HRC would not give out there pipe specs to Milan racing because they are not the official company that makes the pipes for...
First of all, HRC would not give out there pipe specs to Milan racing because they are not the official company that makes the pipes for HRC. In 1993 both PC and Bill’s made the official HRC pipes for the CR125 race bikes. PC did McGrath 125 national bike in 93, and Bill’s did Henry’s and Lamson’s pipes. Bill’s made the official HRC pipe till 1997 for the CR125 . So Milan didn’t have the specs for the pipe, and neither PC,Bill’s or HRC would give them the specs. Here’s Lamson’s 1994 HRC CR125R engine

Holy macaroni 😍
1
1/1/2021 9:36pm Edited Date/Time 1/1/2021 9:39pm
Id love that case with the option to adjust power valves settings.
Im going to wrap my hose with heat wrap as my pipe is fat and presses against the hose. Didnt even cross my mind
sandman768
Posts
7952
Joined
3/21/2014
Location
Saratoga Springs, NY US
1/2/2021 5:56am
Wow! Drooling.....🥲
KVA_536
Posts
91
Joined
4/5/2017
Location
Alto, MI US
1/9/2021 5:29am
Recently picked up a Bill’s Silencer from the Honda of Troy team. Todd Dehoop rebuilding his 1995 CR250 found this in his collection, HAD to grab it for my 1996 CR125 build 🤙🏼


3

Post a reply to: 94-97 CR 125 HRC Spec Cone Pipe

The Latest