Looking for ‘93 Honda CR125 parts

epoxymx
Profile picture for user epoxymx
Posts
25
Joined
5/21/2020
Location
San Diego, CA, USA
epoxymx
Trying to do a resto build on one and am looking for parts. Thanks
2
|
sandman768
Profile picture for user sandman768
Posts
8106
Joined
3/21/2014
Location
Saratoga Springs, NY, USA
sandman768 5/23/2020 11:00am
5/23/2020 11:00am
epoxymx wrote:
Trying to do a resto build on one and am looking for parts. Thanks
Be more specific...what parts? eBay has plenty of 90”s CR parts...
Black Diesel Bomber 5/23/2020 2:53pm
5/23/2020 2:53pm
What are you starting with? A shit pile or decent bike? I'm starting one as well. Mine is clean but I'll be replacing a lot of it.
epoxymx
Profile picture for user epoxymx
Posts
25
Joined
5/21/2020
Location
San Diego, CA, USA
epoxymx 5/25/2020 1:09pm
5/25/2020 1:09pm
Sorry, should’ve been more specific. Looking for radiators, forks, metal ignition case cover(stock is plastic) , clamps, pretty much will consider anything that’s out there.

Starting out with a pos for sure, it sat outside for a long time. Engine is good though, no corrosion in the water pump or anything. Thanks
Black Diesel Bomber 5/25/2020 3:05pm
5/25/2020 3:05pm
epoxymx wrote:
Sorry, should’ve been more specific. Looking for radiators, forks, metal ignition case cover(stock is plastic) , clamps, pretty much will consider anything that’s out there. Starting...
Sorry, should’ve been more specific. Looking for radiators, forks, metal ignition case cover(stock is plastic) , clamps, pretty much will consider anything that’s out there.

Starting out with a pos for sure, it sat outside for a long time. Engine is good though, no corrosion in the water pump or anything. Thanks
That stuff is easily found on eBay. I would use the cheap GPI radiators. They look good and they work.

The Shop

See All »
epoxymx
Profile picture for user epoxymx
Posts
25
Joined
5/21/2020
Location
San Diego, CA, USA
epoxymx 5/25/2020 7:17pm
5/25/2020 7:17pm
epoxymx wrote:
Sorry, should’ve been more specific. Looking for radiators, forks, metal ignition case cover(stock is plastic) , clamps, pretty much will consider anything that’s out there. Starting...
Sorry, should’ve been more specific. Looking for radiators, forks, metal ignition case cover(stock is plastic) , clamps, pretty much will consider anything that’s out there.

Starting out with a pos for sure, it sat outside for a long time. Engine is good though, no corrosion in the water pump or anything. Thanks
Black Diesel Bomber wrote:
That stuff is easily found on eBay. I would use the cheap GPI radiators. They look good and they work.
Yes, I’ve been looking on eBay a lot. Hoping to keep it somewhat OEM stuff. The only thing I’d like to change is the forks and maybe go with a more modern front end. Thanks
SmokinJoe439
Profile picture for user SmokinJoe439
Posts
2386
Joined
3/7/2012
Location
Renton, WA, USA
SmokinJoe439 5/25/2020 8:16pm
5/25/2020 8:16pm
The ignition / stator cover design is the same from 87 through 07. Honda never changed it all those years in 01 is when they changed it from plastic to aluminium.
epoxymx
Profile picture for user epoxymx
Posts
25
Joined
5/21/2020
Location
San Diego, CA, USA
epoxymx 5/25/2020 8:53pm
5/25/2020 8:53pm
SmokinJoe439 wrote:
The ignition / stator cover design is the same from 87 through 07. Honda never changed it all those years in 01 is when they changed...
The ignition / stator cover design is the same from 87 through 07. Honda never changed it all those years in 01 is when they changed it from plastic to aluminium.
Thanks, ya I’m looking for stuff like that. Was hoping maybe someone had some parts laying around but prob best to just hit eBay
epoxymx
Profile picture for user epoxymx
Posts
25
Joined
5/21/2020
Location
San Diego, CA, USA
epoxymx 5/28/2020 9:52pm
5/28/2020 9:52pm Edited Date/Time 5/31/2020 8:39am

Post a reply to: Looking for ‘93 Honda CR125 parts