Posts
337
Joined
12/28/2010
Location
Roanoke, VA, USA
Yamaha Power Tuner app- Can't connect
Upgrade to enjoy this feature!
Vital MX fantasy is free to play, but Premium users receive great benefits. Premium benefits include:
- View and download rider stats
- Pick trends
- Create a private league
- And more!
Only $10 for all 2026 SX, MX, and SMX series.
The Shop
DeCal Works Huge Plastic Inventory of UFO and Polisport kits.
Free shipping: VITALMX
Here is a pic of the error
When I went to a new phone that network either wouldn't show up or would not connect. It was some setting buried in my phone where it would not connect to networks without an internet connection. Changed it and all good. If you were able to connect before but now you can't maybe you had a setting get changed in an update pushed out to you.
Not sure why it is connecting briefly and then saying “No Internet Connection”
Before you begin you will need to know some basic info from your network.
BTW this was performed on an iPhone
Click on WiFi settings (click on the info icon (blue circle with lower case i )
Locate the IPV4 section -
Write down YOUR current information
IP Address:
Subnet Mask:
Router:
Using WiFi - connect to your bike’s network.
Once connected - click on the info icon (blue circle with lower case i )
Return to the IPV4 section -
Configure IP should say automatic
Tap on automatic and select manual
Enter your current IP address changing the last section to
an unused number. Example IP xxx.xxx.xxx.250
(Do not go higher than .254
Enter the subnet mask and your router info that you previously wrote down.
You should be able to now send data to your bike.
Does the tuner only work via wifi (as in connected to a router) or can the phone be used as the server? Ie, hot-spot
If I'm out and about, how can you conect and addjust your settings
Iv turned wifi off and hot-spot on my Huawei phone and can't figer how to conect to the app
Did you ever fix this problem? as my 2019 WR450F has started doing the same thing.
It was working fine until a month ago, any suggestions?
Cheers Warwick from Australia
The 2018+ 450 or 2019+ 250fs have there own wifi transpoders which our devices can connect to. The passwords are under the shifter side number plate remove the # plate to locate the "unique serial number wifi password" .
When your connected to your bike YOU WILL HAVE NO INTERNET CONNECTION many phones have settings hiding these networks or have pop ups asking if you're sure you want to connect without internet. CLICK YES. Your bike is your INTERNET you must preload maps etc etc. You can only use the power tuner app while connected. You can use the speedometer/timer/maintence/diagnostics reader while connected to your bikes internet. You can send your maps to and from. But You won't have connection aka nothing else outside of the powertuner app that requires internet will work. Usually IF YOU USE WIFI CONNECTION FOR CALLS/TEXTS you will lose service for the time being while connected to the bike.
•if your phone was connected , everything worked fine but now you can't connect its most likely due to your phone updating and changing permissions to the Power Tuner app. I sometimes have to go to my Google/apple play store to open the Tuner app. Go in your phones APP settings and type the GYTR Tuner app and make sure all your permissions are allowed. THEN go check your internet firewall/settings make sure it's "okay to connect to networks with no internet connection". You'd be amazed by what those phone "updates" can do if you read them.
If you still can't find your bikes WIFI signal aka network I'd suggest getting someone else's device different to yours and see if thats able to find your bikes WIFI. FYI You don't need the app to see your bikes transponder.
If no other device finds your bikes WIFI I'd start by checking fuses & go down the list. Eventually checking the voltage reaching the transponder. I know a normal 14.1 vdc while at idle is good BUT DONT QUOTE ME check your manual...but I'm sure there will be a big difference voltage wise if your "wifi transponder" is bad. Possibly water damage, crash damage, voltage spikes could easily kill the transponder
I hope this helps I just wanted to give my 2 cents on the thoughts I had if I lost connection to my bike. Theres many ways to skin a 🐈 .
Did anybody figure the issue out?
-aphillyatd
2019 yz250f 🫡
Post a reply to: Yamaha Power Tuner app- Can't connect