Vortex on a Ktm 450 question

blaze 57
Profile picture for user blaze 57
Posts
392
Joined
4/11/2018
Location
Inchelium, WA, USA
blaze 57
Edited Date/Time 9/19/2018 9:10am
Recently acquired a used Vortex X10 cdi. Came off an 18' KTM 450. I'm confused which map setting on your handlebar you use.
Do you use map #2 to get into the various X10 mapping programs?
Map #1 ---for what?
Thanks!
|
aone
Profile picture for user aone
Posts
10
Joined
9/28/2017
Location
Lakeside, CA, USA
aone 9/19/2018 8:41am
9/19/2018 8:41am
#1 selects the base vortex map.

#2 selects whichever map you have the dial set to on the vortex ecu. So set that dial to something other than 1.

To set your TPS hold down your kill switch and push the start button for a few seconds, then while still holding the kill switch, push the starter with the throttle WFO.
2
mxracer515
Profile picture for user mxracer515
Posts
86
Joined
8/13/2015
Location
Drexel, MO, USA
mxracer515 9/19/2018 9:02am
9/19/2018 9:02am
It will look like this
2
blaze 57
Profile picture for user blaze 57
Posts
392
Joined
4/11/2018
Location
Inchelium, WA, USA
blaze 57 9/19/2018 9:10am
9/19/2018 9:10am
HUGE help! thanks for the info.

Post a reply to: Vortex on a Ktm 450 question