2003 kx250 wheel fitment...

ternst12
Profile picture for user ternst12
Posts
95
Joined
6/24/2014
Location
Buffalo, NY, USA
ternst12
I have a 2003 kx250 and was wondering what other wheels I can put on there. 04 and up kx250, kx450 etc? Do I need to use the other year spacers, rotors? Any help would be appreciated.
|
TKL965
Profile picture for user TKL965
Posts
151
Joined
5/5/2014
Location
AU
TKL965 9/4/2016 8:13pm
9/4/2016 8:13pm
...and I think it was a combo of kxf and kx spacers to fit it up.
ternst12
Profile picture for user ternst12
Posts
95
Joined
6/24/2014
Location
Buffalo, NY, USA
ternst12 9/4/2016 9:28pm
9/4/2016 9:28pm
I can get an 09 kx450 wheel set pretty cheap. Looks like that should be good then.
BobPA
Profile picture for user BobPA
Posts
8340
Joined
10/31/2013
Location
USA
BobPA 9/5/2016 11:13am
9/5/2016 11:13am
Rear wheel will bolt right up

Front will need spacers from and 06+ four stroke

Front rotors are a different bold pattern from the 2003 and older...but it does not matter

The Shop

See All »
ternst12
Profile picture for user ternst12
Posts
95
Joined
6/24/2014
Location
Buffalo, NY, USA
ternst12 9/5/2016 12:41pm
9/5/2016 12:41pm
BobPA wrote:
Rear wheel will bolt right up Front will need spacers from and 06+ four stroke Front rotors are a different bold pattern from the 2003 and...
Rear wheel will bolt right up

Front will need spacers from and 06+ four stroke

Front rotors are a different bold pattern from the 2003 and older...but it does not matter
Thanks Bob!
mathew8
Profile picture for user mathew8
Posts
2
Joined
8/16/2018
Location
North Little Rock, AR, USA
mathew8 8/16/2018 12:05pm
8/16/2018 12:05pm
I have the same bike 03 KX250. Also, I have a buddies 2009 kx250f and I am trying to get the front wheel on my bike. How did you end up getting the front wheel swap to work? The only way it gets close, but not perfect because wheel has some drag, is large spacer from 03 kx on caliper side, one spacer from 09 kxf on other side, 03 kx axle. However it seems like the spacer on caliper side needs a little taken off and it also appears there needs to be a washer on each caliper bolt in between the caliper and fork mounts so the rotor lines up in the center of the caliper? Anyone done this before?

Post a reply to: 2003 kx250 wheel fitment...