Tokyo mods Remap questions

at687
Profile picture for user at687
Posts
165
Joined
12/30/2015
Location
Newport Beach, CA US
at687
Edited Date/Time 9/18/2017 10:06pm
I have a 2018 husky FC450 with a full FMF system on. I have not re-mapped it or anything else. I have about 5 hours on the bike and I'm getting some decel popping (not much) I run half 91 and T4. Mostly all T4 but when I don't have enough T4 I'll mix some 91 with it.

Should I adjust the TPS or just simply send it to Tokyo Mods for a re-map?
Also thinking about drilling some holes and getting a 2 stroke screen less filter cage for it.

Thanks!
|
mxb2
Profile picture for user mxb2
Posts
22437
Joined
6/15/2010
Location
Bowie, MD US
mxb2 9/6/2017 6:39pm
9/6/2017 6:39pm
Remap will take care of the problem,. Screenless cage, t4, u4.4 straight. That bike will rip. Justin at Tokyo mods is awesome. Call him tell him Billy sent ya. Quick turnaround shipping. Insure the ECU when you ship. Tell him the mods you have, and fuel. Stay consistent with what you tell him. You will. Be happy with the results.
NeedMoto
Profile picture for user NeedMoto
Posts
780
Joined
8/6/2015
Location
Penn Valley, CA US
NeedMoto 9/6/2017 7:31pm
9/6/2017 7:31pm
mxb2 wrote:
Remap will take care of the problem,. Screenless cage, t4, u4.4 straight. That bike will rip. Justin at Tokyo mods is awesome. Call him tell him...
Remap will take care of the problem,. Screenless cage, t4, u4.4 straight. That bike will rip. Justin at Tokyo mods is awesome. Call him tell him Billy sent ya. Quick turnaround shipping. Insure the ECU when you ship. Tell him the mods you have, and fuel. Stay consistent with what you tell him. You will. Be happy with the results.
This^^^
They will put it in the mail back to you, the same day they received it from you.

Justin is always happy to chatWink
at687
Profile picture for user at687
Posts
165
Joined
12/30/2015
Location
Newport Beach, CA US
at687 9/6/2017 7:38pm
9/6/2017 7:38pm
mxb2 wrote:
Remap will take care of the problem,. Screenless cage, t4, u4.4 straight. That bike will rip. Justin at Tokyo mods is awesome. Call him tell him...
Remap will take care of the problem,. Screenless cage, t4, u4.4 straight. That bike will rip. Justin at Tokyo mods is awesome. Call him tell him Billy sent ya. Quick turnaround shipping. Insure the ECU when you ship. Tell him the mods you have, and fuel. Stay consistent with what you tell him. You will. Be happy with the results.
NeedMoto wrote:
This^^^
They will put it in the mail back to you, the same day they received it from you.

Justin is always happy to chatWink
Sounds good! I'll do just that. Luckily I live close enough to drive to the shop.

Thanks for your guy's help!
CarlinoJoeVideo
Profile picture for user CarlinoJoeVideo
Posts
7518
Joined
11/30/2013
Location
Portland/Los Angeles, CA US
CarlinoJoeVideo 9/6/2017 8:21pm
9/6/2017 8:21pm
You can also take it to Twisted Development. They have great maps.

The Shop

See All »
Bruce372
Profile picture for user Bruce372
Posts
6329
Joined
4/1/2008
Location
US
Bruce372 9/6/2017 9:47pm
9/6/2017 9:47pm
Tokyo mods did my remap on my 2017 fc450, with full fmf, no screen and pump gas .

Before it was lean, after the map it runs really smooth and well.
Digger29
Profile picture for user Digger29
Posts
1885
Joined
11/2/2011
Location
Oxford, MA US
Digger29 9/8/2017 6:37am
9/8/2017 6:37am
Unfortunately I still had to adjust my TPS after I had the ECU remapped by Tokyo Mods on my 17 KTM450FE. It still had the right off of an idle stumble and if you let it idle right down and whacked the throttle it would sometimes stumble and stall. I adjusted my TPS setting from it's stock .55 to .64 and the stumble and hesitation right off idle was gone and it revved very quick when blipping the throttle.
at687
Profile picture for user at687
Posts
165
Joined
12/30/2015
Location
Newport Beach, CA US
at687 9/8/2017 1:34pm
9/8/2017 1:34pm
Digger29 wrote:
Unfortunately I still had to adjust my TPS after I had the ECU remapped by Tokyo Mods on my 17 KTM450FE. It still had the right...
Unfortunately I still had to adjust my TPS after I had the ECU remapped by Tokyo Mods on my 17 KTM450FE. It still had the right off of an idle stumble and if you let it idle right down and whacked the throttle it would sometimes stumble and stall. I adjusted my TPS setting from it's stock .55 to .64 and the stumble and hesitation right off idle was gone and it revved very quick when blipping the throttle.
That's good to know. I'm taking it to Tokyo on Monday and will ride Wednesday and see how it feels. I'm not sure how to adjust the TPS but I'll take it to my mechanic if needed.
Tonynz
Profile picture for user Tonynz
Posts
846
Joined
9/21/2014
Location
NZ
Tonynz 9/8/2017 8:06pm
9/8/2017 8:06pm
Tokyo Mods did the ECU on my 16 350SXF, great job.
slothy
Profile picture for user slothy
Posts
211
Joined
10/9/2016
Location
Saint Clair Shores, MI US
slothy 9/9/2017 5:10pm
9/9/2017 5:10pm
mxb2 wrote:
Remap will take care of the problem,. Screenless cage, t4, u4.4 straight. That bike will rip. Justin at Tokyo mods is awesome. Call him tell him...
Remap will take care of the problem,. Screenless cage, t4, u4.4 straight. That bike will rip. Justin at Tokyo mods is awesome. Call him tell him Billy sent ya. Quick turnaround shipping. Insure the ECU when you ship. Tell him the mods you have, and fuel. Stay consistent with what you tell him. You will. Be happy with the results.
screen less/decreeing the cage really help that much?
mxb2
Profile picture for user mxb2
Posts
22437
Joined
6/15/2010
Location
Bowie, MD US
mxb2 9/9/2017 5:33pm
9/9/2017 5:33pm
mxb2 wrote:
Remap will take care of the problem,. Screenless cage, t4, u4.4 straight. That bike will rip. Justin at Tokyo mods is awesome. Call him tell him...
Remap will take care of the problem,. Screenless cage, t4, u4.4 straight. That bike will rip. Justin at Tokyo mods is awesome. Call him tell him Billy sent ya. Quick turnaround shipping. Insure the ECU when you ship. Tell him the mods you have, and fuel. Stay consistent with what you tell him. You will. Be happy with the results.
slothy wrote:
screen less/decreeing the cage really help that much?
It helps, and it's a cheap mod. No toil or twin make kits.
slothy
Profile picture for user slothy
Posts
211
Joined
10/9/2016
Location
Saint Clair Shores, MI US
slothy 9/9/2017 5:50pm
9/9/2017 5:50pm
mxb2 wrote:
Remap will take care of the problem,. Screenless cage, t4, u4.4 straight. That bike will rip. Justin at Tokyo mods is awesome. Call him tell him...
Remap will take care of the problem,. Screenless cage, t4, u4.4 straight. That bike will rip. Justin at Tokyo mods is awesome. Call him tell him Billy sent ya. Quick turnaround shipping. Insure the ECU when you ship. Tell him the mods you have, and fuel. Stay consistent with what you tell him. You will. Be happy with the results.
slothy wrote:
screen less/decreeing the cage really help that much?
mxb2 wrote:
It helps, and it's a cheap mod. No toil or twin make kits.
thanks, just ordered a toil setup from rocky mountain a few mins go and filled out a Tokyo mods ecm re flash. see if i can get my fx350 a little happier in the woods
Bruce372
Profile picture for user Bruce372
Posts
6329
Joined
4/1/2008
Location
US
Bruce372 9/9/2017 6:17pm
9/9/2017 6:17pm
You can just order a filter cage from a 16 sx125 for 12 bucks and it has no screen.

Tokyo mods advised me against changing the tps, you can just turn up the idle slightly and it increases tps voltage apparently
mxb2
Profile picture for user mxb2
Posts
22437
Joined
6/15/2010
Location
Bowie, MD US
mxb2 9/9/2017 6:23pm
9/9/2017 6:23pm
Bruce372 wrote:
You can just order a filter cage from a 16 sx125 for 12 bucks and it has no screen. Tokyo mods advised me against changing the...
You can just order a filter cage from a 16 sx125 for 12 bucks and it has no screen.

Tokyo mods advised me against changing the tps, you can just turn up the idle slightly and it increases tps voltage apparently
X2 2017 ktm 150sx cage also. Yes. ,Tokyo mods told me the same thing. Leave the TPS alone.
mxb2
Profile picture for user mxb2
Posts
22437
Joined
6/15/2010
Location
Bowie, MD US
mxb2 9/9/2017 6:24pm
9/9/2017 6:24pm
slothy wrote:
screen less/decreeing the cage really help that much?
mxb2 wrote:
It helps, and it's a cheap mod. No toil or twin make kits.
slothy wrote:
thanks, just ordered a toil setup from rocky mountain a few mins go and filled out a Tokyo mods ecm re flash. see if i can...
thanks, just ordered a toil setup from rocky mountain a few mins go and filled out a Tokyo mods ecm re flash. see if i can get my fx350 a little happier in the woods
Np man, keep us posted on your review, see what ya think.
at687
Profile picture for user at687
Posts
165
Joined
12/30/2015
Location
Newport Beach, CA US
at687 9/11/2017 4:53pm
9/11/2017 4:53pm Edited Date/Time 9/11/2017 4:55pm
I just got my ECU remapped from Tokyo mods., they told me to only use it on Map 1 and that on Map 2 it doesn't do anything is that correct? I'll be riding it on Thursday or Saturday to see how much it changed. 2018 FC450 full fmf and T4 gas
mxb2
Profile picture for user mxb2
Posts
22437
Joined
6/15/2010
Location
Bowie, MD US
mxb2 9/11/2017 8:54pm
9/11/2017 8:54pm
at687 wrote:
I just got my ECU remapped from Tokyo mods., they told me to only use it on Map 1 and that on Map 2 it doesn't...
I just got my ECU remapped from Tokyo mods., they told me to only use it on Map 1 and that on Map 2 it doesn't do anything is that correct? I'll be riding it on Thursday or Saturday to see how much it changed. 2018 FC450 full fmf and T4 gas
I would follow what Tokyo mods told you, in reference to your map switch.
IceMan446
Profile picture for user IceMan446
Posts
4676
Joined
1/10/2010
Location
Sacramento, CA US
IceMan446 9/12/2017 1:00pm
9/12/2017 1:00pm
at687 wrote:
I just got my ECU remapped from Tokyo mods., they told me to only use it on Map 1 and that on Map 2 it doesn't...
I just got my ECU remapped from Tokyo mods., they told me to only use it on Map 1 and that on Map 2 it doesn't do anything is that correct? I'll be riding it on Thursday or Saturday to see how much it changed. 2018 FC450 full fmf and T4 gas
I had my 350 done by Tokyo and tried map 2 and it felt like it did before the remap.

More aggressive than map 1. Runs fine to me but I leave it on map 1 as thats what they recommended.

Used the husky two stroke cage and pump gas and I'm good to go.
at687
Profile picture for user at687
Posts
165
Joined
12/30/2015
Location
Newport Beach, CA US
at687 9/12/2017 2:37pm
9/12/2017 2:37pm
at687 wrote:
I just got my ECU remapped from Tokyo mods., they told me to only use it on Map 1 and that on Map 2 it doesn't...
I just got my ECU remapped from Tokyo mods., they told me to only use it on Map 1 and that on Map 2 it doesn't do anything is that correct? I'll be riding it on Thursday or Saturday to see how much it changed. 2018 FC450 full fmf and T4 gas
IceMan446 wrote:
I had my 350 done by Tokyo and tried map 2 and it felt like it did before the remap. More aggressive than map 1. Runs...
I had my 350 done by Tokyo and tried map 2 and it felt like it did before the remap.

More aggressive than map 1. Runs fine to me but I leave it on map 1 as thats what they recommended.

Used the husky two stroke cage and pump gas and I'm good to go.
Good to know. I'm riding milestone tomorrow to try it out, see how it feels

Pit Row

See All »
slothy
Profile picture for user slothy
Posts
211
Joined
10/9/2016
Location
Saint Clair Shores, MI US
slothy 9/13/2017 7:22am
9/13/2017 7:22am


IceMan446
Profile picture for user IceMan446
Posts
4676
Joined
1/10/2010
Location
Sacramento, CA US
IceMan446 9/14/2017 12:59am
9/14/2017 12:59am
at687 wrote:
Good to know. I'm riding milestone tomorrow to try it out, see how it feels
Let us know what you thought after your ride.
Digger29
Profile picture for user Digger29
Posts
1885
Joined
11/2/2011
Location
Oxford, MA US
Digger29 9/14/2017 8:51am
9/14/2017 8:51am
at687 wrote:
I just got my ECU remapped from Tokyo mods., they told me to only use it on Map 1 and that on Map 2 it doesn't...
I just got my ECU remapped from Tokyo mods., they told me to only use it on Map 1 and that on Map 2 it doesn't do anything is that correct? I'll be riding it on Thursday or Saturday to see how much it changed. 2018 FC450 full fmf and T4 gas
Yes, they remap your standard map which is map 1 so use map 1 on your handlebar switch. If you choose map 2 you'll be using the OEM KTM aggressive map.
at687
Profile picture for user at687
Posts
165
Joined
12/30/2015
Location
Newport Beach, CA US
at687 9/14/2017 11:29pm
9/14/2017 11:29pm
at687 wrote:
Good to know. I'm riding milestone tomorrow to try it out, see how it feels
IceMan446 wrote:
Let us know what you thought after your ride.
I haven't rode it yet ,rode my 2 stroke but I will be riding my husky this Saturday and will post how it feels.. thanks guys for all the insight and helpful info
at687
Profile picture for user at687
Posts
165
Joined
12/30/2015
Location
Newport Beach, CA US
at687 9/16/2017 10:29am
9/16/2017 10:29am
at687 wrote:
Good to know. I'm riding milestone tomorrow to try it out, see how it feels
IceMan446 wrote:
Let us know what you thought after your ride.
Just did a few motos this morning. What a difference! Crisp throttle response and pulls much better than before the remap. I tried map 2 and feels same as it did stock but now has no decel popping.

Tokyo mods is highly recommended!
mxb2
Profile picture for user mxb2
Posts
22437
Joined
6/15/2010
Location
Bowie, MD US
mxb2 9/16/2017 1:04pm
9/16/2017 1:04pm
at687 wrote:
Good to know. I'm riding milestone tomorrow to try it out, see how it feels
IceMan446 wrote:
Let us know what you thought after your ride.
at687 wrote:
Just did a few motos this morning. What a difference! Crisp throttle response and pulls much better than before the remap. I tried map 2 and...
Just did a few motos this morning. What a difference! Crisp throttle response and pulls much better than before the remap. I tried map 2 and feels same as it did stock but now has no decel popping.

Tokyo mods is highly recommended!
Nice. What fuel are you using?
at687
Profile picture for user at687
Posts
165
Joined
12/30/2015
Location
Newport Beach, CA US
at687 9/16/2017 1:18pm
9/16/2017 1:18pm
IceMan446 wrote:
Let us know what you thought after your ride.
at687 wrote:
Just did a few motos this morning. What a difference! Crisp throttle response and pulls much better than before the remap. I tried map 2 and...
Just did a few motos this morning. What a difference! Crisp throttle response and pulls much better than before the remap. I tried map 2 and feels same as it did stock but now has no decel popping.

Tokyo mods is highly recommended!
mxb2 wrote:
Nice. What fuel are you using?
I'm using T4. I also got the 2 stroke cage for it
mxb2
Profile picture for user mxb2
Posts
22437
Joined
6/15/2010
Location
Bowie, MD US
mxb2 9/16/2017 8:07pm
9/16/2017 8:07pm
at687 wrote:
Just did a few motos this morning. What a difference! Crisp throttle response and pulls much better than before the remap. I tried map 2 and...
Just did a few motos this morning. What a difference! Crisp throttle response and pulls much better than before the remap. I tried map 2 and feels same as it did stock but now has no decel popping.

Tokyo mods is highly recommended!
mxb2 wrote:
Nice. What fuel are you using?
at687 wrote:
I'm using T4. I also got the 2 stroke cage for it
Cool cool,thanks
IceMan446
Profile picture for user IceMan446
Posts
4676
Joined
1/10/2010
Location
Sacramento, CA US
IceMan446 9/18/2017 2:06pm
9/18/2017 2:06pm
at687 wrote:
Just did a few motos this morning. What a difference! Crisp throttle response and pulls much better than before the remap. I tried map 2 and...
Just did a few motos this morning. What a difference! Crisp throttle response and pulls much better than before the remap. I tried map 2 and feels same as it did stock but now has no decel popping.

Tokyo mods is highly recommended!
I felt the same way after having it done. Well worth the money.

Glad you like it!

jlane97
Profile picture for user jlane97
Posts
4
Joined
9/18/2017
Location
Algonquin, IL US
jlane97 9/18/2017 10:06pm
9/18/2017 10:06pm
Guys I have 17' ktm 450 xcf that I do woods riding with. Bikes been great for the most part but a little backfire/pop on accel. Our first cooler day here in Washington was this past weekend and the bike is stumbling. Sitting in neutral if you crack the throttle in Boggs right out even when plenty warm. I took the gas tank apart and saw that not only was the filter dirty but it had a pinhole in the top of the fuel filter. I replaced justnow thinking it was the problem and unfortunately it isn't.

Any help, trying to do a hare scramble this weekend.

BobPA
Profile picture for user BobPA
Posts
8323
Joined
10/31/2013
Location
PA US
BobPA 9/18/2017 10:12pm
9/18/2017 10:12pm
jlane97 wrote:
Guys I have 17' ktm 450 xcf that I do woods riding with. Bikes been great for the most part but a little backfire/pop on accel...
Guys I have 17' ktm 450 xcf that I do woods riding with. Bikes been great for the most part but a little backfire/pop on accel. Our first cooler day here in Washington was this past weekend and the bike is stumbling. Sitting in neutral if you crack the throttle in Boggs right out even when plenty warm. I took the gas tank apart and saw that not only was the filter dirty but it had a pinhole in the top of the fuel filter. I replaced justnow thinking it was the problem and unfortunately it isn't.

Any help, trying to do a hare scramble this weekend.

Buy the TPS tool and set it. Huge difference with my bike. I went from .55 to .60 and it stopped the decel pop and random flame out. My bike is bone stock. TPS tool is like $30
slothy
Profile picture for user slothy
Posts
211
Joined
10/9/2016
Location
Saint Clair Shores, MI US
slothy 9/19/2017 6:12am
9/19/2017 6:12am
i got time to ride my 17 fx350 this weekend (single track) - the Tokyo map def woke her up adn extremely happy with the money spent. Had a few random flame outs, some which where prob self inflicted stales. i'm going to check tps/bump rpm a tad more. also may go up one more on rear sprocket. currently -1 down in front and +1 in rear.

Post a reply to: Tokyo mods Remap questions