13-16 KX250F Pro Circuit Camshaft

redcouch1212
Profile picture for user redcouch1212
Posts
19
Joined
7/20/2014
Location
Beverly Hills, CA, USA
redcouch1212
Been in contact with PC regarding engine building, but who ever Im dealing with is like pulling teeth to get any decent information out of(like talking to a service advisor instead of a technician). So let me ask some people who have some experience. What do the Pro Circuit camshafts do for my engine(2013)? My current focus is to move the power band more towards the top of the RPM range, were I prefer to ride in. Anyone know if the PC cams change the engine characteristic to work in the top end, or do they just improve the stock power band? Some expensive parts to be selling without any decent information.
|
DTHA70
Profile picture for user DTHA70
Posts
336
Joined
9/25/2008
Location
Surprise, AZ, USA
DTHA70 8/16/2016 10:31am
8/16/2016 10:31am
PC cams are a waste of money. go to DCR and have him spec a set to get you exactly what youre looking for.
redcouch1212
Profile picture for user redcouch1212
Posts
19
Joined
7/20/2014
Location
Beverly Hills, CA, USA
redcouch1212 8/17/2016 12:59pm
8/17/2016 12:59pm
Not asking about alternatives, bump.
jhansen510
Profile picture for user jhansen510
Posts
2405
Joined
2/10/2009
Location
GREENFIELD, MN, USA
jhansen510 8/17/2016 2:44pm
8/17/2016 2:44pm
I agree with DTHA70!
ianhendry46
Profile picture for user ianhendry46
Posts
394
Joined
8/18/2011
Location
Murfreesboro, TN, USA
ianhendry46 8/17/2016 8:40pm
8/17/2016 8:40pm
Agreed. PC doesn't make their cams anyways. If your looking for more top end and don't want to spend a chunk of change, go with stage 2 hot cams. Decent cams that move the power to where you like it.

The Shop

See All »
redcouch1212
Profile picture for user redcouch1212
Posts
19
Joined
7/20/2014
Location
Beverly Hills, CA, USA
redcouch1212 8/18/2016 8:15am
8/18/2016 8:15am
ianhendry46 wrote:
Agreed. PC doesn't make their cams anyways. If your looking for more top end and don't want to spend a chunk of change, go with stage...
Agreed. PC doesn't make their cams anyways. If your looking for more top end and don't want to spend a chunk of change, go with stage 2 hot cams. Decent cams that move the power to where you like it.
They don't make their cams... Then who does? Its not that I don't believe you, as a lot of their stuff they make it a little too obvious who they source from, but it would actually help me answer my question if you could point out who makes their camshafts. Thanks.
slipdog
Profile picture for user slipdog
Posts
10054
Joined
7/25/2009
Location
Nor Cal, CA, USA
slipdog 8/18/2016 9:34am
8/18/2016 9:34am
redcouch1212 wrote:
They don't make their cams... Then who does? Its not that I don't believe you, as a lot of their stuff they make it a little...
They don't make their cams... Then who does? Its not that I don't believe you, as a lot of their stuff they make it a little too obvious who they source from, but it would actually help me answer my question if you could point out who makes their camshafts. Thanks.
Mega Cycle in San Rafael
redcouch1212
Profile picture for user redcouch1212
Posts
19
Joined
7/20/2014
Location
Beverly Hills, CA, USA
redcouch1212 8/18/2016 11:26am
8/18/2016 11:26am
redcouch1212 wrote:
They don't make their cams... Then who does? Its not that I don't believe you, as a lot of their stuff they make it a little...
They don't make their cams... Then who does? Its not that I don't believe you, as a lot of their stuff they make it a little too obvious who they source from, but it would actually help me answer my question if you could point out who makes their camshafts. Thanks.
slipdog wrote:
Mega Cycle in San Rafael
Ah there we go, thanks! I googled PC and Megacycle, no doubt they manufacture the cams, not sure if they still do as that's not confirmed. They also apparently will not sell PC cams directly, cutting out the middleman. Ill have to see if they can at least help me with some info on a cam that is what I want in my build. Thanks slipdog
yvaillancourt371 2/2/2020 4:54pm
2/2/2020 4:54pm
If it can help anybody.

CSK16250 camshaft specs.
Intake lift: 0.377"
Exhaust lift: 0.354"

Post a reply to: 13-16 KX250F Pro Circuit Camshaft