Can am 125 OEM replacement parts?

Joko
Profile picture for user Joko
Posts
1547
Joined
1/2/2011
Location
Haddam, CT, USA
Fantasy
118th
Joko
Edited Date/Time 1/1/2015 4:18pm
I picked up a 1975 Can Am125 MX2,
And was wondering if anyone knew where I cani get OEM replacement parts ?
|
AHRMA361 12/22/2014 3:44pm
12/22/2014 3:44pm
Not sure if you mean engine, body or chassis parts (or all!?)

Some resources:

www.classiccanam.com/

www.canned-ham.com/

www.rtrmoto.com/

Frames were interchangeable 125/175/250 on MX2's. Obviously, pipes were different and the bigger bikes had a wider rear wheel. Hubs all the same though.

Try and get the foam baffle out of the oil reservoir in the frame backbone. It will disintegrate and plug up the injector lines.
Joko
Profile picture for user Joko
Posts
1547
Joined
1/2/2011
Location
Haddam, CT, USA
Fantasy
118th
Joko 12/22/2014 5:19pm
12/22/2014 5:19pm
Ok, thanks! But won't the foam disintegrate if you try to remove it? Are these bikes worth much as a collector's perspective?
AHRMA361 12/22/2014 6:09pm
12/22/2014 6:09pm
Not in my experience. But what you are worried about are particles that come off and can plug your feed lines. You have to flush it out thoroughly after removal. Don't want to risk a seizure due lack of oil!
PN27416
Profile picture for user PN27416
Posts
1100
Joined
6/12/2008
Location
Coopersburg, PA, USA
PN27416 12/22/2014 6:53pm
12/22/2014 6:53pm
For motor parts:
Al Roberts and Mike Murphy are great, both should be listed on the classic can-am website.

The Shop

See All »
Joko
Profile picture for user Joko
Posts
1547
Joined
1/2/2011
Location
Haddam, CT, USA
Fantasy
118th
Joko 1/1/2015 4:18pm
1/1/2015 4:18pm
Here she is. Had an offer to buy it from me for 1600...is it worth more?

Post a reply to: Can am 125 OEM replacement parts?