Are Talon Carbon hubs lightest?

MOTO120
Posts
1377
Joined
3/21/2010
Location
MOTO, IL, USA
Edited Date/Time 12/11/2012 6:59pm
Are the Talon Carbon Fiber hubs the lightest hubs available on the market....meaning lighter than TCR hubs and/or any OEM hubs? Am I correct in saying Honda has the lightest OEM hubs.....but are these carbon hubs even lighter? Just curious, thanks for any input!
|
therealjonon
Posts
1546
Joined
4/1/2008
Location
Santa Clarita, CA, USA
12/11/2012 9:38am
i think thats a carbon fiber sticker wrapped around the hub...i dont think the hub is actually carbon fiber......
newmann
Posts
24437
Joined
4/1/2008
Location
USA
12/11/2012 9:39am
Call Troy at TCR and ask him. He seems to answer the phone most of the time I called. The Talons look to be aluminum with just a carbon wrap arond the center. Are they actually any lighter than a standard Talon? No one ever seems to post up the weight of this stuff that claims to be so trick. Remember when Yamaha sold billet magnesium hubs and triple clamps through their GYT-R program?



TeamGreen
Posts
37818
Joined
11/25/2008
Location
Thru-out, CA, USA
12/11/2012 10:03am
The Talons ARE a Hybrid of Carbon & Al...it looks to me like the Carbon is wrapped over a thin-walled AL. tubes and SHrink-Taped on as a "Build-Up".

Also, it looks like hey have a new Design/MFG process...so...they may have improved on this.

Me? I'm looking into making the Real-Deal w/ Troy at TCR. Why? He's like DC...He's in this 'cause he loves it and his 1st hubs were built as HRC-Replacements...and...K-Dub has run'em all the way Up the Podium.

As to wieght? Not sure. I'd still go run with the stuff from Lodi. Troy's one of us.

I'm jus' sayin'...
lumpy790
Posts
11872
Joined
9/18/2007
Location
York, SC, USA
12/11/2012 10:26am Edited Date/Time 12/11/2012 10:26am
every "carbon fibber hub" I have looked at was a Carbon Fibber look ..... just laid over a std hub.

The Shop

newmann
Posts
24437
Joined
4/1/2008
Location
USA
12/11/2012 10:38am
How much more would it cost to toss a chunk of billet mag in the CNC vs a chunk of aluminum? Or you could do like the guy did with the CRF450 and have molds made to cast your own mag hubs.Smile


or a magnesium swingarm and linkage?



1
RVR
Posts
69
Joined
12/21/2010
Location
Atkins, AR, USA
12/11/2012 11:12am
in my case it would just be better to loose a few pounds around my waist. instead of on the bike.
rrdecals
Posts
168
Joined
5/6/2010
Location
Durango, CO, USA
12/11/2012 11:29am
We use stock honda hubs turned down on a lathe. lightest hub out there.
12/11/2012 11:29am
If you decide to go with TCR, Troy is a solid dude. Make sure to call, he might be running a special. I just got a set of TCR hubs with excel rims for my 06 cr250. The hubs look great and the wheels are true and round. His prices were better than a talon set up.
GuyB
Posts
35722
Joined
7/10/2006
Location
Aliso Viejo, CA, USA
12/11/2012 4:26pm
i think thats a carbon fiber sticker wrapped around the hub...i dont think the hub is actually carbon fiber......
To say that they're a carbon sticker overlay is incorrect. I've seen cutaways of these hubs, and they're constructed with a carbon shell bonded to billet sections on each side.

Bayo also has a set that he's been using on a project bike. You'll see more on these from us in the future.
Hut
Posts
10281
Joined
4/27/2010
Location
USA
12/11/2012 4:31pm
i think thats a carbon fiber sticker wrapped around the hub...i dont think the hub is actually carbon fiber......
GuyB wrote:
To say that they're a carbon sticker overlay is incorrect. I've seen cutaways of these hubs, and they're constructed with a carbon shell bonded to billet...
To say that they're a carbon sticker overlay is incorrect. I've seen cutaways of these hubs, and they're constructed with a carbon shell bonded to billet sections on each side.

Bayo also has a set that he's been using on a project bike. You'll see more on these from us in the future.
Are they lighter?
ocscottie
Posts
69092
Joined
8/16/2006
Location
Redding, CA, USA
12/11/2012 4:44pm
Carbon Fiber gives me a boner.

...carry on Whistling
GuyB
Posts
35722
Joined
7/10/2006
Location
Aliso Viejo, CA, USA
12/11/2012 4:54pm
It's sort of hard to tell when they're already built into a wheel. Wink

I checked with the gang at Dubya, and they said that Talon's carbon rear hub is 2 lbs. 9 ounces.
newmann
Posts
24437
Joined
4/1/2008
Location
USA
12/11/2012 5:33pm
GuyB wrote:
It's sort of hard to tell when they're already built into a wheel. ;) I checked with the gang at Dubya, and they said that Talon's...
It's sort of hard to tell when they're already built into a wheel. Wink

I checked with the gang at Dubya, and they said that Talon's carbon rear hub is 2 lbs. 9 ounces.
Compared to the stock weight of the hubs they are replacing which weigh how much?
GuyB
Posts
35722
Joined
7/10/2006
Location
Aliso Viejo, CA, USA
12/11/2012 5:40pm Edited Date/Time 12/11/2012 5:44pm
newmann wrote:
Compared to the stock weight of the hubs they are replacing which weigh how much?
I dunno. Pull apart one of each model of each brand, and get back to us. Wink

Walking through the pits every weekend, I can tell you which of the two that many teams seem to prefer. Hint: it ain't the stock one.
TerryK
Posts
9899
Joined
8/17/2006
Location
CA
12/11/2012 5:42pm
newmann wrote:
How much more would it cost to toss a chunk of billet mag in the CNC vs a chunk of aluminum? Or you could do like...
How much more would it cost to toss a chunk of billet mag in the CNC vs a chunk of aluminum? Or you could do like the guy did with the CRF450 and have molds made to cast your own mag hubs.Smile


or a magnesium swingarm and linkage?



Holy shit thats cool!
newmann
Posts
24437
Joined
4/1/2008
Location
USA
12/11/2012 5:44pm
newmann wrote:
Compared to the stock weight of the hubs they are replacing which weigh how much?
GuyB wrote:
I dunno. Pull apart one of each model of each brand, and get back to us. ;) Walking through the pits every weekend, I can tell...
I dunno. Pull apart one of each model of each brand, and get back to us. Wink

Walking through the pits every weekend, I can tell you which of the two that many teams seem to prefer. Hint: it ain't the stock one.
You would think that someone in the business of selling ultra high expensive, uber trick carbon hubs would be providing this information to the masses. Top secret stuff 'eh?Wink
TeamGreen
Posts
37818
Joined
11/25/2008
Location
Thru-out, CA, USA
12/11/2012 6:52pm
newmann wrote:
Compared to the stock weight of the hubs they are replacing which weigh how much?
GuyB wrote:
I dunno. Pull apart one of each model of each brand, and get back to us. ;) Walking through the pits every weekend, I can tell...
I dunno. Pull apart one of each model of each brand, and get back to us. Wink

Walking through the pits every weekend, I can tell you which of the two that many teams seem to prefer. Hint: it ain't the stock one.
newmann wrote:
You would think that someone in the business of selling ultra high expensive, uber trick carbon hubs would be providing this information to the masses. Top...
You would think that someone in the business of selling ultra high expensive, uber trick carbon hubs would be providing this information to the masses. Top secret stuff 'eh?Wink
Sometimes "not telling" is part of the contract.

I'm jus' sayin'...
Hut
Posts
10281
Joined
4/27/2010
Location
USA
12/11/2012 6:59pm
newmann wrote:
How much more would it cost to toss a chunk of billet mag in the CNC vs a chunk of aluminum? Or you could do like...
How much more would it cost to toss a chunk of billet mag in the CNC vs a chunk of aluminum? Or you could do like the guy did with the CRF450 and have molds made to cast your own mag hubs.Smile


or a magnesium swingarm and linkage?



That is completely trick!


If we are just going off looks in the pits I want a set or two of these beauties.

Post a reply to: Are Talon Carbon hubs lightest?

The Latest