Wiring new killswitch, help!

SuzukiGang
Edited Date/Time 3/11/2019 2:26pm
Bought a new kill switch and as you can see the connections are different (might have got sent the wrong one?) how would you go about wiring the kill switch to the body harness, just splice/hardwire them together? Not the best with wiring so any advice is greatly appreciated? bike is an 04 rm125 if that makes any difference?‍♂️
|
harescrambled 3/11/2019 2:26pm
3/11/2019 2:26pm
I'd cut the other connector off the old one and splice it in. That way you don't have to chop up the stock wiring harness.
Falcon
Profile picture for user Falcon
Posts
12460
Joined
11/16/2011
Location
Menifee, CA, USA
Falcon 3/11/2019 4:52pm
3/11/2019 4:52pm
harescrambled wrote:
I'd cut the other connector off the old one and splice it in. That way you don't have to chop up the stock wiring harness.
I like it. Good answer.

Post a reply to: Wiring new killswitch, help!