Posts: 37
Joined: 5/16/2017
Location: Hillside, NJ USA
Hello guys
i understund that my riding sag on the bike is 110m and i want to change it to 105
in order to change it i need to remove the link and wp or no need to remove anything?
and i can just change it while its on the bike
much ty
Posts: 4611
Joined: 1/10/2010
Location: Sacramento, CA USA
Edited Date/Time:
Put the bike on the stand so the rear wheel is off the ground, get the correct size allen and loosen the lock ring at the top of the shock spring, turn the shock spring 2-3 turns tighter (to the left) and re-check the sag I think one turn is around 2mm in sag or pretty close.
Once its where you want it, tighten the lock ring. No need to do anything else.
Posts: 1083
Joined: 8/20/2015
Location: USA
RTFM. This is described in the manual that you got with the bike or can download from KTM website...
Posts: 89
Joined: 12/13/2016
Location: Newark, CA USA
Posts: 396
Joined: 8/22/2016
Location: Boston, MA USA
Posts: 5002
Joined: 7/24/2013
Location: GA, USA
