Posts
333
Joined
1/3/2014
Location
Raleigh, NC
US
Hey all, just finished freshening up my bike and it's throwing code 13. I replaced the rings, cam chain, and water pump. 96 hrs on the bike.
Once I got everything back together it took forever to start the first time. It now starts up and idles fine but bogs when I crack the throttle. If I give throttle real slow it will rev up to an extent.
Checked continuity of the IAT sensor and the power tuner app shows temperature accurately.
Any ideas? If the sensor is reading why else would it throw a code for it?
Thanks on advance!
Edit: just realized that code is for pressure not temp...BRB lol.
Once I got everything back together it took forever to start the first time. It now starts up and idles fine but bogs when I crack the throttle. If I give throttle real slow it will rev up to an extent.
Checked continuity of the IAT sensor and the power tuner app shows temperature accurately.
Any ideas? If the sensor is reading why else would it throw a code for it?
Thanks on advance!
Edit: just realized that code is for pressure not temp...BRB lol.
Post a reply to: 2019 YZ250F diagnostic code 13?