2019 YZ250F Power Tuner problems

wst260
Profile picture for user wst260
Posts
22
Joined
5/2/2020
Location
AU
wst260
Hi all,

currently having problems getting my 19 YZ250F to connect to the power tuner app, i can get it to connect to the bike through wifi settings but when i open the app the bike isn’t connected and won’t let me send maps....

Any advice is appreciated
Cheers
|
Bennett59
Profile picture for user Bennett59
Posts
865
Joined
9/3/2015
Location
Bakersfield, CA, USA
Bennett59 8/10/2020 5:50pm
8/10/2020 5:50pm
If it’s connected through WiFi it should be good is the bike on or off, maps I think bike has to be on to send other stuff the starter can just be bumped to check it. If connect to WiFi start bike make sure it’s says your WiFi gytr tuner go in app click on machine and click monitor see if it’s truly connected it should when you twist throttle show the curve and show some temp. Readings as well. But I belive maps bike has to be running to send
Sachmo831
Profile picture for user Sachmo831
Posts
253
Joined
10/7/2015
Location
South Bend, IN, USA
Sachmo831 8/10/2020 7:47pm
8/10/2020 7:47pm
I had this issue with my 450. My phone would connect through the wifi but nothing inside the app. I deleted the app and reinstalled 2 or 3 times before it finally worked. No issues since then
Sachmo831
Profile picture for user Sachmo831
Posts
253
Joined
10/7/2015
Location
South Bend, IN, USA
Sachmo831 8/10/2020 11:21pm
8/10/2020 11:21pm
I had this issue with my 450. My phone would connect through the wifi but nothing inside the app. I deleted the app and reinstalled 2 or 3 times before it finally worked. No issues since then
barryhowie 5/14/2023 5:12pm
5/14/2023 5:12pm

You have to start the bike to log in. Then shut it off to send maps, but it automatically logs out after 60 seconds once the bike is off. So start it, connect to the app, shut it off and send the map. Then you can restart it and it will stay connected. At least in my experience it won’t let you change maps while it’s running, but the Wi-Fi shuts off after 60 seconds when it’s not running.

Post a reply to: 2019 YZ250F Power Tuner problems