Dodge key fob

Splat03
Profile picture for user Splat03
Posts
345
Joined
8/5/2018
Location
Kiowa, CO, USA
Fantasy
931st
Splat03
Does anyone have a cheaper way than dealer or locksmith to program a Dodge key fob? They are in the $100-$200 range. I have a ‘16 Ram with a proximity key fob and I’d like a spare. The truck did not come with an extra when I bought it(used). I have a cheap code reader that’s not up to the task of pulling the needed programming code. Thoughts? Ideas? Proven solutions? I’ve tried most of the stuff found on YouTube but I haven’t had success. Thanks.
|
charlie68
Profile picture for user charlie68
Posts
161
Joined
6/28/2019
Location
North Windham, CT, USA
charlie68 7/15/2022 4:56am
7/15/2022 4:56am
Splat03 wrote:
Does anyone have a cheaper way than dealer or locksmith to program a Dodge key fob? They are in the $100-$200 range. I have a ‘16...
Does anyone have a cheaper way than dealer or locksmith to program a Dodge key fob? They are in the $100-$200 range. I have a ‘16 Ram with a proximity key fob and I’d like a spare. The truck did not come with an extra when I bought it(used). I have a cheap code reader that’s not up to the task of pulling the needed programming code. Thoughts? Ideas? Proven solutions? I’ve tried most of the stuff found on YouTube but I haven’t had success. Thanks.
To the best of knowledge ( been out of the key making gig for 6 years now ) you need 2 working prox keys ( and not one that has already been cloned ) to add a 3rd without plugging in and "making" a key, Id say your best bet is locksmith.
ToolMaker 7/15/2022 5:54pm
7/15/2022 5:54pm
I was at an ACE Hardware store the other day that advertised they make FOB keys.
Of course the one I was at was in Lahina, Maui but if they do it there then your local one probably does it too.
TM
Johnny Foxx 7/16/2022 4:00pm
7/16/2022 4:00pm
I work at a dealer (not Chrysler) and I checked the service information to see if there was a way to program it without a scanner. As far as I can tell there isn’t because it looks like you need the sentry pin code you mentioned. If you know anybody that has an aftermarket scanner it may work, and probably be cheaper than a dealer.
Splat03
Profile picture for user Splat03
Posts
345
Joined
8/5/2018
Location
Kiowa, CO, USA
Fantasy
931st
Splat03 8/22/2022 7:37pm
8/22/2022 7:37pm
Update: I took the spare fob with while visiting the in-laws in small-town UP. The folks at the local small dealership (Northern Auto Inc) hooked up the programming for about 60 bucks. Obviously I'd like to be able to do it cheaper and easier but we now have a spare and won't be stuck paying hundreds when i lose, break, dog eats or otherwise mess up the only one I had. Thanks for the input fellas, I really like the Maui option. I'll keep that one in mind if I can talk the missus into a trip.
2

The Shop

See All »
ns503
Profile picture for user ns503
Posts
4599
Joined
4/1/2008
Location
NS Toolies, CA
ns503 8/23/2022 4:38am
8/23/2022 4:38am
This isn't Dodge, but we just got a used VW. Beetle. (Way way against my better judgement, but sometimes in relationships, well, whaddya do).

Only had one key/fob with it. Called up the closest VW dealer. $500 for a new one. Frickin robbery, but they have you at their mercy. Googling shows lots of issue with programming so they work right or even just start your car, & getting them cut if you try to go aftermarket.

Post a reply to: Dodge key fob