Shifter problem'13 KTM 450 similar Dung pic

nornevrder
Profile picture for user nornevrder
Posts
649
Joined
3/20/2011
Location
Reno, NV US
nornevrder
Edited Date/Time 9/23/2013 8:05am
So here is one of our local pros Jermey Riddle. He had a shifter problem at the last state race and a buddy was able to snap this pic.
|
hsrmx
Profile picture for user hsrmx
Posts
14
Joined
9/5/2010
Location
Astoria, OR US
hsrmx 9/21/2013 4:13pm
9/21/2013 4:13pm
nornevrder wrote:
So here is one of our local pros Jermey Riddle. He had a shifter problem at the last state race and a buddy was able to...
So here is one of our local pros Jermey Riddle. He had a shifter problem at the last state race and a buddy was able to snap this pic.
Quite impressive, but looks like a good way to lose a couple fingers to me.
fanger
Profile picture for user fanger
Posts
834
Joined
3/24/2013
Location
AU
fanger 9/23/2013 6:43am
9/23/2013 6:43am
i did loose the end of my finger doing that, seemed like a good idea at the time though.
resetjet
Profile picture for user resetjet
Posts
2387
Joined
3/16/2012
Location
Tampa, FL US
resetjet 9/23/2013 7:18am
9/23/2013 7:18am
I think ktm is the only one who has a 10mm bolt going into the end of the shift shaft. It loosens up with normal shifting. Mine comes loose all the time. Gotta check it every ride. I heard some guys safety wire it to prevent this.
lumpy790
Profile picture for user lumpy790
Posts
9242
Joined
9/18/2007
Location
York, SC US
lumpy790 9/23/2013 7:22am
9/23/2013 7:22am
Gary Bailey teaches his students to heel shift

The Shop

See All »
mxrose3
Profile picture for user mxrose3
Posts
2170
Joined
8/17/2006
Location
Delmar, DE US
Fantasy
1046th
mxrose3 9/23/2013 8:05am
9/23/2013 8:05am
resetjet wrote:
I think ktm is the only one who has a 10mm bolt going into the end of the shift shaft. It loosens up with normal shifting...
I think ktm is the only one who has a 10mm bolt going into the end of the shift shaft. It loosens up with normal shifting. Mine comes loose all the time. Gotta check it every ride. I heard some guys safety wire it to prevent this.
I put loctite on mine.... haven't had a problem since.

Post a reply to: Shifter problem'13 KTM 450 similar Dung pic