All

2021 KTM 150sx. $5,900 Located near Madison, Wisconsin Race Tech gold valve suspension (forks have 2 hrs on valving install and servicing) Eric Gorr porting V-Force reed cage P-3 carbon skid plate New chain and sprockets Brand new rear tire 81 hours on chassis 30 hours on complete motor rebuild with new crank (professionally rebuilt) 10 hours on fresh top...

Does anyone have a 10-20 hour review of this bike? Just curious if any gremlins have come up with the new motor, maintenance issues, comparisons to pre-22 models, etc. I've seen a few ride reviews and "bike tests" online but just looking for some member feedback.

Not a lot of time on it, not much else to say, 39 spring $90 shipped

These things are awesome. Includes Huck Valve and everything you need to drop them in and go! The springs are .44. I will also include one .42 spring and one .52 spring so you can mix and match to get your desired spring rate. You’ll never go back to air after riding with these. Pretty standard valving for B rider...

2022 KTM 250SX 25 hours Vet ridden (I'm a slow +50 vet, not a +25A guy...) Motorex oil change every 3-4 hours Cone valve forks with .47 springs. I will also include .43 and .49 springs (Don't have stock forks, so don't ask...) Forks serviced a couple times this year, totally rebuilt by PR2 prior to season TLD race team...

Located near Madison, Wisconsin 2019 KTM 125sx with the following stuff: Full TZR motor (always ran C12/pump gas mix) MX-Tech Lucky spring conversion forks .44 springs (also have original air cartridges if wanted) Race Tech shock 39 spring V-force reed cage Works Connection holeshot device Jetted perfect, different slide, needle, jet nozzle, main, pilot JD Jetting float gasket fix KTM...

Not a ton of use on these boots, good condition. My son just outgrew them. Black marks on side are just from gripping the bike so much. Soles are good (see pics). Cleaned after every ride. $120 shipped US.

2020 KTM 450 sx-f. Cone valves just fully serviced by PR2. .48 springs, also have .43 and .46 springs. Shock is stock with a 48 spring. Twisted Development remap of stock ignition box. 37 easy hours on bike, ridden by slow 53 year old. Oil changed every 3 hrs. New chain and sprockets. Like new condition. $8,500. Located near Madison...

Fits 19-22 KTM, mounts directly to tabs on frame. Great condition, one scuff on the bottom. $125 shipped. Might fit Husky or GasGas if the have the same mounting brackets on the frame, verify on your end, thanks.

FMF Part number 045639 - verify fitment to your bike. Like new, maybe 8 hrs use. Fits perfect. Selling bike so taking the good stuff off. These are $1,200 new if you can find them. $900 shipped.

1987 Honda CR500 -- $8,000 -- Waunakee, Wisconsin US I am the original owner of this bike. However, I do not have a title or MSO for it. My state does not title MX bikes and I do not have the original MSO. It has not been ridden since about 1995. A few years back I started to completely disassemble...

I believe this stuff was from Red Bud 2020. JGR, Pro Circuit, TLD, AEO, Rockstar Husky. Note JGR shrouds are same side. Make an offer for anything here.

WP 36 shock spring. The black letters/numbers are worn off, so I guess you'll have to trust me it is a 36 spring. We had this on my son's 125 to replace the stock 39 spring but now he is too heavy for this 36 so going up to the 39. $95 shipped to lower 48 US.

Full Ti System less than 10 hours use like new $1,000 shipped (can't find these anywhere); should fit KTM/HSQ/GG but check with FMF to make sure part numbers are the same Twisted Development exhaust flange should fit KTM/HSQ/GG $200 shipped Pics are of exhaust on bike - fits perfect. Exhaust flange is on bike, you can see it shiny chrome...

4.5 spring $75 shipped 5.2 spring $75 shipped Two 48T sprockets - one never used, one minimal use - $50 shipped for each