Recent Activity
All
motomind00132 Liked a reply to forum topic Get ecu or vortex ecu (2018 yz450f) ?
7/23/2024 11:02am
Which ever one has a shop cloesest to you that you can use to have it dyno tuned. If your going to use a shop and just send the ecu out for a remap. Pick the shop your goning to use and go with what they use. Some like get some like vortex or aim. As far as one or the other being better or more reliable. I'v used them both and they both work great. Both have a ton of capabilities. The Get does have wifi tuning to tweak maps at the track from your phone. Also have not...
This forum topic has 2 replies.
Morris_Bell Started a new thread Get ecu or Vortex? 2018 yz450f
7/23/2024 9:25am Which ☝️
This forum thread has 1 reply.
Morris_Bell Started a new thread Get ecu or vortex ecu (2018 yz450f) ?
7/23/2024 9:08am Which ecu should I use?
This forum thread has 2 replies.
Morris_Bell Added a reply to 2016 yz450f sluggish acceleration after T4
6/24/2024 12:00pm Tried switching back to vp110, same problems occurred. Maybe the fuel pump is bad or regulator on pump
Morris_Bell Started a new thread 2016 yz450f sluggish acceleration after T4
6/24/2024 9:31am Hey having problems with my 2016 yz450f. I switched fuel from vp110 to T4 and had nothing but problems . The bike is sluggish on acceleration now, I race the same track most weekends. I had to add 6 teeth from normal gearing and it’s still not right. I just had the bike rebuilt from bottom and top end few...
This forum thread has 5 replies.
Morris_Bell
Added bike check 2016 yz450f
6/24/2024 9:21am
Morris_Bell Started a new thread High attitude jetting 2007 kx450f Colorado
12/11/2017 8:49am Looking for help with jetting, I’ve been getting different opinions. My bike is stock besides Jemco exhaust system, rd bowl with adjustable leak jet. When I removed carb I found a 45 pilot, 175 main , and 1 1/2 turns out on fuel screw, but when I turned fuel screw all the way in the bike didn’t stall so I...
This forum thread has 1 reply.
Morris_Bell Added a reply to Jetting for 2007 kx450f in Denver Colorado 5280 elevation
12/11/2017 8:41am ????
Morris_Bell Started a new thread Jetting for 2007 kx450f in Denver Colorado 5280 elevation
12/10/2017 10:47pm Looking for help with jetting, I’ve been getting different opinions. My bike is stock besides Jemco exhaust system, rd bowl with adjustable leak jet. When I removed carb I found a 45 pilot, 175 main , and 1 1/2 turns out on fuel screw, but when I turned fuel screw all the way in the bike didn’t stall so I...
This forum thread has 2 replies.