Lives in:
FI
Member Since:
5/26/2021
Recent Activity
All
JT227 Added a reply to 125/150/250/300 KTM/HUS/GG jetting thread
5/26/2021 11:01pm Thank you StevenMX. Good to hear that that setup works well also with fatty and on those altitudes and temperatures. Excited to try it out and see how it works. Thank you guys! I've been planning to add 300cc kit and change the pipe for FMF or PC, but before that, I'd want to make that 250 HGS setup run...
More »
JT227 Added a reply to 125/150/250/300 KTM/HUS/GG jetting thread
5/26/2021 11:35am Thank you AJ 
I will make it a little richer than your setup and see if it feels too rich. I think it’s colder and more oxygen rich in here, so believe it is better to start with rich setup. I’ve been thinking to chance my pipe for PC, but it is a little bit difficult to buy in...
I will make it a little richer than your setup and see if it feels too rich. I think it’s colder and more oxygen rich in here, so believe it is better to start with rich setup. I’ve been thinking to chance my pipe for PC, but it is a little bit difficult to buy in...
AJ565 Liked a reply to forum topic 125/150/250/300 KTM/HUS/GG jetting thread
5/26/2021 11:31am
Pipe and silencer didn’t change my jetting. I run a PC pipe and the long silencer for more top end over rev. If you want/need more bottom go with a shorty like the 304. I don’t know anyone running a HGS pipe or even a FMF around here. On the ‘18’s (which is the same as the ‘20’s) the PC pipe picked up a little over 1hp from stock taking it from 47.xx to 49.xx
This forum topic has 1234 replies.
JT227 Added a reply to 125/150/250/300 KTM/HUS/GG jetting thread
5/26/2021 11:14am Hello guys! I’ve been reading through this topic but I did not find coversation about how pipe and silencer affects for carb setups? I’d like to test AJ’s setups, but before that I’d want to ask if anyone have tested these setups with HGS pipe and silencer? Or do you guys believe these setups will be suitable also with HGS...