All

Hi all, I replaced the flywheel, and I still get around 10v AC instead of 29... I don't get it... I've got the exact same values. Can a stator produce less voltage, despite having the resistance values in the specified ranges?

I could finally measure the AC voltage. Here are the values when engine is cold. When engine is hot there where approximately the sames, slightly lower (my pc crashed before I could save the values ...). I've got a 2008-2010 workshop manual which indicated that the voltage should be above 29V. I guess it is the same range for the...

When I plug a 12V battery I have an injection every time. I suppose it is normal as when pressing the kick, one of the first thing you need to do when you get voltage is to inject fuel for the incoming compression. However, when I plug the battery for the first time, the fuel spray is very weak, sometimes...

Chain tensionner is alsmost half way. Enought to provoke this? how do you check for fuel injector leakage ? If i connect a 12v battery with the fuel pump running, should i see fuel exiting the injector ?

thanks, that could explain my problem. When you had this issue, didn't your ECU raised a fault code? And the sensor itself wasn't like an open circuit when testing it with a multimeter ?

Valves too tight: you mean valve clearance ? I had not enough clearance, and now i have too much, but the starting issue is the same. i have ordered new shims to be in the tolerances... What do you mean by "the stator is acting up" ? I have also ordered a new spark plug,but i don't think it will...