Recent Activity
All
Dan_Wilson Added a reply to Help with hot start yz250f
7/28/2016 12:58am Hi yep I don't use it. Push down with spring in and silicone that piece in pic . How that sound?
More »
Dan_Wilson Added a reply to Help with hot start yz250f
7/27/2016 9:44am Ok thanks I'm still stuck with no cable though hence me thinking about bunging it up and screwing back in or buying new and bunging?
Dan_Wilson Added a reply to Help with hot start yz250f
7/27/2016 9:13am Hi thanks for reply I think this will screw back in ok. Would it be possible to bung that up with something and then screw back in with plunger down? 
Dan_Wilson Added a reply to Help with hot start yz250f
7/26/2016 10:55pm Hi thank you for replies. I've not had any issues starting before never needed it. As the whole thing is pulled out and exposing the plunger will air be sucked through there causing issues?
Dan_Wilson Started a new thread Help with hot start yz250f
7/26/2016 10:17am Hi there I recently broke clutch lever holder and today I replaced it but it had no hot start holder on new part so I thought I would try remove it and zip tie it further along the frame. As I was doing this with a very slight pull the whole thing pulled out the top of the carb leaving...
This forum thread has 9 replies.