Recent Activity
All
boolzi Added a reply to 2023 KTM Wiring Harness Failure
5/27/2024 5:57am I did check it, it’s clean. As far as water and corrosion I don’t wash my bike very often, I rarely run in mud, just dusty track and trails. And when I do wash it a garden hose is all it takes.
More »
boolzi Added a reply to 2023 300xc randomly completely losing power/cutting out.
5/26/2024 4:39pm Wonder if the tip over sensors can become an issue?
boolzi Added a reply to 2023 300xc randomly completely losing power/cutting out.
5/26/2024 1:08pm I did. Not super pumped about it. Looking at a 350 now, maybe 450.
boolzi Added a reply to 2023 300xc randomly completely losing power/cutting out.
5/26/2024 10:14am Thanks for the link, i dont have a facebook account but was very interested in reading issues like mine. With is with the 2 strokes? That dudes shoulder X-ray that crashed because of the bog on a jump is terrible looking. I rode about 1.5 hours yesterday and about 30 minutes this morning with no issue but every time i...
boolzi Added a reply to 2023 300xc randomly completely losing power/cutting out.
5/26/2024 8:57am I may do that, actually i will do it.
boolzi Added a reply to 2023 300xc randomly completely losing power/cutting out.
5/26/2024 3:52am I rode for about an hour and a half yesterday, no issues. But it could go a couple of rides without doing it. I ended up changing the ccps too. do these have a roll over sensor? Can I bypass it?
boolzi Added a reply to 2023 300xc randomly completely losing power/cutting out.
5/25/2024 2:29pm Posting that pic of my cups above I noticed the foam seal looks tore and maybe not sealing good. I may go switch it with the one under seat.
boolzi Added a reply to 2023 300xc randomly completely losing power/cutting out.
5/25/2024 2:20pm So I took it off today and tube and it was clean. I have a brand new one but haven’t put it on. My issue seems like it’s not the ccps. That seems to affect idle and low rpms. Here’s pick of my ccps and tube from this morning’s search for issue. Im currently riding (taking break) but kinda staying...
boolzi Added a reply to 2023 300xc randomly completely losing power/cutting out.
5/25/2024 8:22am The above pick is of my old filter, new filter, and a plastic wire sheath that fell off the pump wile i was changing filter. It must be dissolving. The old filter is kinda black.
boolzi Added a reply to 2023 300xc randomly completely losing power/cutting out.
5/25/2024 8:20amboolzi Started a new thread 2023 300xc randomly completely losing power/cutting out.
5/25/2024 3:47am This started a couple weeks ago. It would randomly “bog”. But in reality it seems fuel is cut off or electric stops cause all I got for a moment is a dead throttle. I’ll check stuff and it will go away for a ride or 2 but come back. Last night it completely shut down going over a 70’ double...
This forum thread has 38 replies.
boolzi Added a reply to 2023 ktm sx 250/300 stall / shut off issue
5/25/2024 3:29am Not yet, not ready to throw 24 years of ktm out, maybe this bike though.
boolzi Added a reply to 2023 ktm sx 250/300 stall / shut off issue
5/25/2024 3:28am I’ll check that, but wouldn’t loose head bolts push cylinder pressure into cooling system, usually pushing out coolant through cap? This does seem to happen hot.
boolzi Added a reply to 2023 KTM Wiring Harness Failure
5/24/2024 6:07pm Well my 2023 300xc has been cutting out randomly. Tonight on a 70’ double. Scary as hell, i have no idea how i landed that endo. i have been searching dealing with this for 2 weeks, random. I’m at the point where i just keep replacing stuff or go to the dealer. I am going to trace my harness out...
boolzi Added a reply to 2023 ktm sx 250/300 stall / shut off issue
5/24/2024 5:48pm I know this is an old thread but i am trying to figure out why my 2023 300xc is bogging/cutting out..basically just losing power when i hit the throttle. Its random. Any update OP?
boolzi Added a reply to KTM Swingarm Bearings
4/13/2024 6:32pm I just spent 40 minutes looking for a needle tonight. I changed my shock spring on my 300xc, just took linkage loose and dropped spring. Wanted to grease bearings before i put it back together and didnt realize they were loose needle and pushed about10 out. Cleaned and greased them as i put them back in with tweezers and pick...
boolzi Added a reply to 2023 KTM 300sx potential issue (pics and video)
3/2/2024 4:09pm Not sure how slavens goes over here but i commented to Jeff about this issue and he is going to be doing a vid on it. He did say there were some bad pistons but the affected engines had obvious ticking.
boolzi Added a reply to 2023 KTM 300sx potential issue (pics and video)
2/15/2024 3:52pm I’m very curious about this too. I put many hours on my 2020 300xc, now have about 15 on my 2023 300. Love the bike and i pin it on my straight aways. Man, i would hate a grenaded engine and I’m lazy to pull piston for a maybe possible issue.
boolzi Added a reply to Black Friday
11/23/2023 4:40pm Me too. Wanting an arai.