Yzf brembo conversion

I don’t have brembo info but I put a 2025 Honda master on my 24 yz450 and it was magic!

Could you please share how it was magical? 

I have a friend who is happy with the power of the Yamaha front brake, but 

would like a more progressive feel. 

Did you only change the master cylinder and reuse the OE Yamaha lever and brake line?

It was magical in the fact that it actually worked! My stock yz450 no matter how much you bleed it was still spongy, apparently this is a common issue with Yamaha.. (My yz250 never has had an issue)

Stock Honda master and Honda lever and they bolt right up to the Yamaha line. I went with a gytr stainless line and it was much stronger and had better modulation. 

https://www.vitalmx.com/forums/tech-helprace-shop/new-gen-yzf-front-bra…

I put the part numbers here a while ago 

This is the way to go ! OEM cable just a smidge tight as the banjo fitting is inboard instead of out.

Best combo is CRF Master cylinder (the one with 11 stamped) and a yz 250 2006 caliper which is bigger along with a stainless steel line!

https://www.vitalmx.com/forums/tech-helprace-shop/yamaha-yz250f-yz450f-ktm-brembo-brake-adapterhanger